![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524133.webp)
7-8 Adding Options
Your system also accepts EISA boards, non-Plug and Play
ISA expansion boards, and SCSI boards. These boards are
configured through the ECU and SCSI utilities.
CAUTION: Before adding, moving, or removing
any expansion board, you should first familiarize
yourself with the Setup, ECU, and SCSI utilities.
Setting system parameters incorrectly or installing a
board incorrectly can disable your system.
See Chapter 3, “Setting System Parameters,” for
information on the Setup utility. See Chapter 4,
“Using ECU and SCSI Utilities,” for information on
the ECU and SCSI utilities.
Use the following procedures for installing an expansion
board in the system.
Precautions
Always remove an expansion board from the shipping
material very carefully. Static discharge can damage board
components. Take the following precautions when handling
a board:
■
Avoid carpets in cool, dry areas.
■
Before handling a board, discharge any static electricity
by touching a grounded metal object, such as the metal
frame inside the system unit.
■
Always hold a board by its edges. Avoid touching the
components on the board.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...