Using the ECU and SCSI Utilities 4-29
■
If the board requires a memory address, choose
“Select Memory Addresses.” The “Select Memory
Addresses” screen appears. Press
Insert
to enter a
memory address or
Delete
to remove a memory
address. When you press
Insert
, the “Add New
Memory” screen appears.
Enter the starting address in hexadecimal format and
the length of the address in kilobytes. Press
Enter
when you are done. The “Select Memory
Addresses” screen appears.
You can add or delete another memory address. You
must limit your selection to nine memory addresses.
Press
F10
when you are done. The “New Board Setup”
screen reappears.
10.
Press
F10
when you finish selecting the resources used
by the board. The “View Current Settings” screen
appears. Press
Enter
to save the current settings. The
“Add confirmation” screen appears.
11.
Read the manufacturer’s comments and press
Enter
when you are done. The “Add” screen appears.
12.
Select the slot in which you want to install the board.
Press
Enter
. If you add a board with a tag such as
“video,” it must be installed in a slot with an identical
tag. Otherwise, select any available slot.
NOTE: If the board causes a conflict in the configu-
ration, a Caution message appears with instructions
to remove the conflict or the system may hang-up.
13.
Press
F10
when the “Step 2: Add or remove boards”
screen appears. The “Steps in configuring your
computer” screen appears.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...