![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524096.webp)
Using the ECU and SCSI Utilities 4-21
Maintain System Configuration Diskette
Select this option to create, load, copy, or delete any neces-
sary system configuration information (SCI) files. You can
also use this option to copy and delete CFG files.
Depending on the system configuration, you might want to
modify the system board SCI file. Before configuring the
system, you must copy configuration files for the EISA
boards, and in some cases, ISA boards. This section pro-
vides copying procedures for both.
CFG files are required to correctly configure EISA boards.
Every EISA board contains settings that determine how the
board works within the system. These settings are in a con-
figuration file and are copied to and stored in the system.
All EISA boards should come with CFG files. If not, check
the configuration files that come on the ECU diskette or
contact the EISA board manufacturer to obtain the appro-
priate files. If your ISA boards did not come with a CFG
file, see “ISA Boards without CFG Files” in this chapter.
Use the following steps to copy or update configuration
files.
1.
Select “Maintain System Configuration Diskette” from
the Main Menu.
2.
Remove the ECU diskette from the diskette drive and
replace it with the configuration diskette that came with
the option board.
3.
Select “Copy/update CFG files” from the menu.
4.
Press
Enter
. A screen appears showing the available
configuration files.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...