![background image](http://html.mh-extra.com/html/nec/image-p100e-service/image-p100e-service_manual_248524189.webp)
Solving Problems 9-3
Troubleshooting
PROBLEM
CORRECTIVE ACTION
Diskette Drive Errors
A diskette won't load.
Check that the diskette is inserted correctly.
Verify that the system unit and monitor power
lamps are on and that the power-on screen
appears on the screen.
If the diskette is not formatted, format it. See
your MS-DOS documentation.
If the diskette drive busy lamp does not light
when you load the diskette, try a different
diskette. If this loads, the problem is in the
software. Call your software dealer.
A Non-System Disk or
Disk Error message is
displayed.
If you are starting from the diskette drive,
insert a diskette with system files into drive A.
If a bootable diskette does not boot, use
Setup to verify that the initial boot parameter
is set to diskette drive A and not a hard disk.
Monitor Problems
The monitor screen
remains dark.
Check that the monitor power cable is
connected to the monitor and a power outlet.
Be sure that the monitor signal cable is
connected to the system unit.
Check that the system unit and monitor
power lamps are on, all monitor connections
are tight, and the brightness and contrast
controls are adjusted.
A distorted image appears
on your monitor screen.
Adjust the video controls on your monitor. If
this doesn't help, turn the monitor off for a
few seconds, then turn it back on.
Содержание IMAGE P100E - SERVICE
Страница 162: ...7 36 Adding Options Adding Options 7 ...
Страница 167: ...Adding Options 7 41 Removing the front panel screws Front Panel Screws ...
Страница 229: ...Glossary 11 write protection Allows reading from a diskette but prevents writing to a diskette ...
Страница 234: ...Index 5 Voltage selector switch 2 9 W Warranty B 8 Work environment A 1 A 7 ...