E X A 1 1 1 0
Model Name: Rockhopper-46/62
E X A 1 1 1 0
Model Name: Rockhopper-46/62
Printer Status Messages
When Message is Displayed
1
• Capping position not specified
The capping position was not dis-
played at the time of initialization.
1-1
1-2
1-3
• Adjust the capping position by running the printer's self-diagnostic "Adjust: Capping posi-
tion".
→
If the capping position parameter is changed for some reason you will not be able to
shift to the next adjustment task so the capping position adjustment should be done
first.
• Check whether the parameters are set to the initial values by running the printer's self-
diagnostic "Adjust: Test print" to output the parameters that have been set.
Refer to the functions and operations manual for the initial values of parameters.
→
If the parameters have been restored to their initial values, please contact the "Inquiry
desk" and quote your printer serial number to obtain a setup list for the time your print-
er was shipped from the factory.
Enter all parameters in accordance with the setup list. (See PAT4000)
• The main board assembly may be damaged.
→
Replace it.
No.
Symptom
Sequence
Items to be Confirmed
When Message is Displayed
Printer Status Messages
1140
2010
2150
R E P
B A C
G O T O R e f . P a g e s
