![background image](http://html1.mh-extra.com/html/mutoh/falcon-outdoor-46/falcon-outdoor-46_maintenance-manual_1860157281.webp)
B A C 2 0 1 0
Model Name: Rockhopper-46/62
B A C 2 0 1 0
Model Name: Rockhopper-46/62
Adjustment: Capping Position
Adjustment: Capping Position
This procedure is used for aligning the capping position correctly by adjusting the
capping position parameters in the firmware.
When this item is selected, the printer carries out the home position detection
sequence and then automatically pushes the carriage against the maintenance unit
to detect the carriage position at that time. The position displayed is the distance
from the home position flag.
H o m e D e t e c t
After the carriage has moved to the capping position,
that position is displayed
H o m e : - 7 4 . 0 0 0
O r i g i n D e t e c t
After the origin has been detected,
the capping position will be detected
AJST: Home
Press [ENTER] to update the capping positions and move to “AJST:
Measure High”, press [Back] to move to “AJST: Home” without updating
the capping position.