R E P 1 5 7 4
Model Name: Rockhopper-46/62
R E P 1 5 7 4
Model Name: Rockhopper-46/62
How to Adjust the Print Head
How to Adjust the Print Head
Item
Replacement and Adjustment Procedure
1. Adjustment
and
Verification
23. Next, check the printing and record a positive increment if Head 2 is
to be moved towards the cap side relative to Head 1, or a negative
decrement for the opposite direction.
Repeat items 20 to 23 until the starting position and the printing
positions of Head 1 and Head 2 are aligned.
24. When "Unidirectional" is finished, execute the "Unidirectional
(Microdot)" adjustment in the same manner.
25. Execute "Margin".
This corrects the printer's media detection position and the actual
printing position.
26. Use a steel ruler and a loupe to measure from the edge of the
media to the printing position and make the correction by entering
the actual measured value.
27. Complete the adjustments by switching off the power.
Bottom distance
(20 mm)
Top distance
(25 mm)
Left side margin
(5 mm)
Right side margin
(5 mm)
Pitch between heads
