R E P 1 5 7 0
Model Name: Rockhopper-46/62
R E P 1 5 7 0
Model Name: Rockhopper-46/62
How to Adjust the Print Head
How to Adjust the Print Head
Item
Replacement and Adjustment Procedure
1. Adjustment
and
Verification
Print Head Adjustment
When the Print Head and the Head Cable are removed, make the follow-
ing adjustments in Diagnostic Mode.
“Capping Position Adjustment”
“Head Rank Input” (Initial filling function is available.)
“Head Nozzle Verification”
“Left Head Tilt Verification”
“Right Head Tilt Verification”
“Repeatability Printing Positioning”, “Repeatability Printing Positioning
(Microdot)”
“Unidirectional”, “Unidirectional (Microdot)’
“Margin”
1. Run Diagnostic Mode.
2. Lower the Pressure Lever and select “Adjustment”.
3. After initialization, load media on the printer.
❈
If the Print Head is not replaced or removed, go to Step 7.
→
Continued on next page
Head rank
(5-digit)
1
2
3
4
5
CAUTION:
Avoid touching, knocking or rubbing the nozzle
face of the Print Head Assembly.
CAUTION:
Cada Print Head Assembly tiene un “rank” that has a
major effect on the ejection of ink. Entering a
wrong rank will adversely affect the life of the
head and the emission of inks. “Rank” is
inscribed on the print head assembly (see dia-
gram on right). The value to be input is a 5-digit
number.
