B A C 2 1 4 0
Model Name: Rockhopper-46/62
B A C 2 1 4 0
Model Name: Rockhopper-46/62
Adjustment: Rear Sensor Position
Adjustment: Rear Sensor Position
This procedure is used to ensure the proper detection of the length of cut sheet
media. It adjusts the position of the rear sensor in the firmware by entering the
media length after cut media has been loaded and detected.
This item is essential in the production process but it is no longer necessary once
media feed distance compensation has been carried out.
When this item is selected, whether media is loaded or not, it will ask for cut sheet
media. If panel diagnosis decides that media is loaded, this will be assumed to be
cut sheet media and media initialization will begin. Therefore roll media should not
be loaded. After the media has been initialized, it will be ejected.
To terminate this program without updating the setting, press the [Back] while no
processing is in progress.
AJST: Rear Sns Posi
Press [ENTER] to update the setting, and move to “AJST: Test Print”.
Set CuttingPaper
After loading media
Paper Initial
After initializing media
Paper X:
594.0 mm
Enter
Paper Y:
840.0 mm
Setting can be specified in
±
0.1 mm units
using the VALUE + and - keys