P A T 3 0 0 0
Model Name: Rockhopper-46/62
P A T 3 0 0 0
Model Name: Rockhopper-46/62
Stored Test Patterns/Print quality adjustment pattern
Stored Test Patterns/Print quality adjustment pattern
Print quality adjustment pattern
This prints patterns shown in the diagram on the right for making fine adjustments of printing
quality.
• Pattern A is for adjusting the Repeatability printing position of the left head.
• Pattern B is for adjusting the Repeatability printing position of the right head.
• Pattern C is for aligning the printing positions of the left and right heads.
1. Make sure no data are being received then mount an A3 or larger sheet of cut media or
roll media in the printer.
2. Start printing by pressing [Shift]+[CLEANING] at the same time.
During printing, [Accur. Adj Plot] will appear in the liquid crystal display unit.
3. Choose the best precision from lines 1) to 7) in patterns A, B and C and make adjust-
ments using the following procedures.
4. [Pattern A:
4] is displayed.
Use the setting Value + and - keys to enter the number of the best image and press
[ENTER].
5. [Pattern B:
4] is displayed.
Use the setting Value + and - keys to enter the number of the best image and press
[ENTER].
6. [Pattern C:
4] is displayed.
Use the setting Value + and - keys to enter the number of the best image and press
[ENTER].
7. [[User 1] Plot OK] is displayed.
The specified values are now stored in the printer.
Good and bad examples of Patterns A and B
Bad
Good
Bad
Good and bad examples of Patterns C
Bad
Good
Bad
A l i g n m e n t P r i n t