B A C 2 0 0 0
Model Name: Rockhopper-46/62
B A C 2 0 0 0
Model Name: Rockhopper-46/62
Adjustment
Adjustment
This procedure is used for correcting media feed and printing position. This is done
by mechanical adjustments (head tilt) and firmware parameter adjustments. If this
item is selected when X and Y excitations are off, the X and Y excitations will be
turned on and the initialization sequence will be carried out. Items for adjustment
are listed in Table 2-1. All these procedures are implemented during production.
When the head is replaced, head cleaning (followed by switching off and replacing
the head), head rank input, ink filling and print positioning are implemented. CW
adjustment, reciprocal printing positioning and zone delay compensation are carried
out when the printing position is to be corrected after a change of media type. If
media feed is off, the media feed distance is compensated.
Table 2-1 Adjustment items
Item
Details
Capping Position Adjustment
To adjust capping position parameters in the firmware
Skew Verification
To use sensor results to check for media skew
Head Rank Input
To enter a specific value for a specific head and fill inks
Head Nozzle Verification
After filling inks, to check head nozzle ejection by print results
Black Head Tilt Verification
To check left head tilt by printing (mechanical adjustment)
Colour Head Tilt Verification
To check right head tilt by printing (mechanical adjustment)
Repeatability Printing Positioning
To align reciprocal printing position by printing
CW Adjustment
To align the shafts of the two heads by printing and adjust left
margin
Flush Pointer Adjustment
To adjust the position for flushing into the flushing box
Media Feed Distance Compensation
To print a line in the X direction and enter its distance (X resolu-
tion adjustment)
XF-XR Sensor Distance
To measure the distance XF and XR sensors with cut media
XF, Cutter-to-Head Distance
To adjust top, bottom, left and right margins
Test Print
To check head nozzles and adjust parameters (enter serial num-
bers)
Head Wash
Done after manufacturing and before head replacement