MUTOH Falcon Outdoor 46, Руководство по обслуживанию

Страница: 295 / 333

B A C 2 1 5 0
Model Name: Rockhopper-46/62
B A C 2 1 5 0
Model Name: Rockhopper-46/62
Adjustment: Test Print
Adjustment: Test Print
This procedure is used to check adjustments by printing a test pattern. it also prints
adjustment parameters and if no serial number has been entered at that time, serial
number input will be requested. Online data signal reception is always enabled but
any data should not be transmitted during the processing of a self-diagnostic
sequence.
ENTER
Back
Adjustment parameter printing
begins
Parameter is printed but serial
number is not printed.
Register Serial Number
Digits to be entered will blink from the left.
Use the VALUE + and - keys to change the
settings
Use [ENTER], [Menu Up] and [Menu Down]
to move between digits
On [ENTER], if no serial number is registered
BZ400001
AJST: TestPrint
ENTER
Printing finished
Printing finished
ENTER
Print
Print
PRINT: ChkNozzles
PRINT: Black Fill
Menu Up Menu Down
Printing finished
ENTER
Print
PRINT: Parameters
Menu Up Menu Down
Press [Back] after adjustment parameter printing has finished to move to
“AJST: HeadWash”. At other times, press [Back] to move to “AJST: TestPrint”.
1 Display varies according to type of printer.
1