R E P 1 3 7 1
Model Name: Rockhopper-46/62
R E P 1 3 7 1
Model Name: Rockhopper-46/62
How to replace the Ink Tubes
How to replace the Ink Tubes
Item
Replacement and Adjustment Procedure
1. Replacement
Procedure
1. Carry out the initial filling.
Joint nut (large)
DE-49778
O-ring (large)
DE-49777
Coupling (black)
DE-49992
O-ring (large)
DE-49777
Joint nut (large)
DE-49778
(Cartridge side)
(Head side)
O-ring (large)
DE-49777
Coupling (white)
DE-49993
Tube stop screw (small)
DE-48950
Ink tube
Head pipe
Cartridge pipe
Ink tube
Coupling screw (large)
DE-49778
Tube fastening O-ring (small)
DE-48949
Diagram showing construction of joiners
2. Carry out a test print.
3. Fit a new Waste Fluid Box.
CAUTION:
Wait at least 30 minutes after the initial filling before printing. Otherwise the printing quality can not be assured.
CAUTION:
If possible, ink cartridges used for initial filling should be cartridges that have not been used previously.
Since a large amount of ink is required for filling, filling may fail if there is insufficient ink remaining.
CAUTION:
About 100 cc of waste fluid will be expelled into the Waste Fluid Box from head cleaning and initial filling. Fit a new Waste Fluid Box. The
message “Change Tank?:” will appear on the panel display. You should confirm by answering “Yes”.
2. Adjustment
and
Examination
Procedure
