E X A 1 0 6 1
Model Name: Rockhopper-46/62
E X A 1 0 6 1
Model Name: Rockhopper-46/62
Printer Status Messages
When Message is Displayed
1
• Media Cut Error
This message is displayed when the
media is not cut and does not fall out
despite the cutting operation having
been performed.
1-6
• There may be a broken Y cable lead, faulty solenoid assembly or a faulty board assembly.
a. Try fitting a new Y cable. (Check for continuity between connectors)
→
If there is up/down movement, replace Y cable.
b. Try fitting a new solenoid assembly. (Check for continuity between connectors)
→
If there is up/down movement, replace solenoid assembly.
c. Try replacing the head board assembly.
(Reference)
after replacement, use the printer's “EXAM: Sensor” self-diagnostic "Edge" to
adjust the amount of sensor reflection. (The adjustment volume is on the head
board.)
d. Try replacing the main board assembly.
(Reference)
Back up the parameters before replacing the main board and check the operation
after executing Recovery with the new main board assembly.
No.
Symptom
Sequence
Items to be Confirmed
When Message is Displayed
Printer Status Messages
R E P
B A C
G O T O R e f . P a g e s
