B A C 2 1 3 0
Model Name: Rockhopper-46/62
B A C 2 1 3 0
Model Name: Rockhopper-46/62
Adjustment: Top and Bottom, Left and Right Margins
Adjustment: Top and Bottom, Left and Right Margins
This procedure involves cutting the media, printing and cutting the media again,
then entering the distances between front sensor and head, cutter and head, and
the media edge sensors and head. Moreover, in order to know the media width
exactly, it determines the correction value of the media edge detecting position.
Adjustment Print
T Margin:
25.0 mm
B Margin:
20.0 mm
> Margin:
5.0 mm
< Margin:
5.0 mm
Menu Up
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
AJST: Margin
An adjustment print is made after the leading edge of the media is cut.
Displayed during adjustment printing
Setting can be specified in 0.1 mm units
using the VALUE + and - keys
Setting can be specified in 0.1 mm units
using the VALUE + and - keys
After print finished and the media was cut
Press [ENTER] to update settings.
Press [ENTER] at Bottom Distance to move to “AJST: Rear Sns Posi”.
Front/Cutter to Head Distance Adjustment Pattern
Adjustment Items
Top and bottom margins, left and right margins
Printing Method
Black, single-pass, uni-directional 360 dpi
Top distance 25
Bottom distance 20
5
5
Black paint, vertical width 9
Output direction
