![background image](http://html1.mh-extra.com/html/mutoh/falcon-outdoor-46/falcon-outdoor-46_maintenance-manual_1860157167.webp)
Memory card
slot
R E P 1 1 4 0
Model Name: Rockhopper-46/62
R E P 1 1 4 0
Model Name: Rockhopper-46/62
How to replace the Main Board Assembly
How to replace the Main Board Assembly
Item
Replacement and Adjustment Procedure
1. Capture back-
up parame-
ters
For main board replacement, in addition to the new main board you must arrange for (1) a memory card for firmware installation and (2) a memory card
for backup parameters (Fujitsu 4 MB card is recommended).
❈
Some memory cards do not always work.
This main board assembly is constructed to accept backup parameters (user parameters and adjustment parameters) in a flash memory card.
Caution:
Be sure to capture these backup parameters
before the board is replaced.
1. Be sure to take up backup parameters before the Main Board
is replaced.
Caution:
If you are unable to do this operation, ask to
see the user setup list.
For adjustment parameters, you can also
contact the Inquiry Desk with the serial num-
ber of your plotter and receive adjustment
parameters.
→
Continued on next page