B A C 5 0 2 3
Model Name: Rockhopper-46/62
B A C 5 0 2 3
Model Name: Rockhopper-46/62
Update: Print Positioning Parameter
Update: Print Positioning Parameter
This procedure will update the print positioning parameter.
UPDATE: PrintPosi (and Micro-Dot)
If [Back] was pressed, a message that the parameter is not updated will appear
and the display will move to “UPDATE: PrintPosi”.
D e l a y L : - 0 . 2 5 0 m m
D e l a y R : - 0 . 2 5 0 m m
L - R G a p : - 3 4 . 2 9 0 m m
P a r a m U p d a t e ?
U p d a t e P a r a m e t e r
Use the VALUE + and - keys to change the
setting and press [ENTER] to confirm the change.
Use the S and - keys to change the
setting and press [ENTER] to confirm the change.
Use the S and - keys to change the
setting and press [ENTER] to confirm the change.
After this display, [Menu Down] will appear
If there is a change, a confirmation message will appear
when you press [ENTER]
The update message will appear when you press [ENTER]
Menu Up
Menu Down
Menu Up
Menu Down