M2DC Series Hardware Manual
138
Rev. 1.1
2018/04
400-820-9661
P-89 (DD)
LED Default status monitor type
Data Range
Default
Unit
Data type
0 - 14
0
DEC
Sets or requests the default monitor status on the driver’s LED display.
P-90 (MA)
LED Warning Display Mask
Code
Data Range
Default
Unit
Data type
0 - 65535
65535
DEC
Some unwanted warnings from the drive’s LED display can be masked to avoid constant flashing of the
display. It is limited to certain warnings: CCW/CW Limits, under voltage, move while disabled, current
foldback, blank Q segments, flash memory, and Comm error.
P-91 (HA)
Accel of seeking end-of-travel
limit during homing
Data Range
Default
Unit
Data type
0.167 - 5000
100
rps/s
DEC
In homing mode, this parameter sets the acceleration rate for seeking the end-of-travel limit.
Left Limit
Origin
Right Limit
Seeking end-of-travel limit, parameter
P-90(HA),P-93(HO),P-96(HV)
Seeking homing switch, parameter
P-91(HA),P-94(HO),P-97(HV)
Feeding to homing switch, parameter
P-92(HA),P-95(HO),P-98(HV)
P-92 (HA)
Accel of seeking homing switch
during homing
Data Range
Default
Unit
Data type
0.167 - 5000
10
rps/s
DEC
In homing mode, after end-of-travel is reached, this sets the acceleration rate for seeking the homing
switch. Refer to parameter P-91 (HA).
P-93 (HA)
Accel of feeding to homing
switch during homing
Data Range
Default
Unit
Data type
0.167 - 5000
10
rps/s
DEC
In homing mode, after the homing switch is reached it sets the acceleration rate for feed back to the
homing switch. Refer to parameter P-91 (HA).
P-94 (HL)
Decel of seeking end-of-travel
limit during homing
Data Range
Default
Unit
Data type
0.167 - 5000
100
rps/s
DEC
In homing mode, this parameter sets the deceleration rate for seeking the end-of-travel limit. Refer to
parameter P-91 (HA).
