107
Rev. 1.1
2018/04
400-820-9661
M2DC Series Hardware Manual
7.5 Position Table Mode
Position table mode allows
Point-to-Point linear motion
and
Rotary motion
without any external pulse
input. Instead, position table mode uses Input ports X7 - X12 to configure different position commands.
Input X4 is the trigger for motion.
NOTE: Only -S type M2DC series servo drive supports position table mode
7.5.1 Linear motion
The Linear motion option for position table mode can set up to 63 positions, not including the homing
position. It is set up through the M Servo Suite software.
7.5.1.1 Linear Motion Software Configuration
• Open M Servo Suite, connect the driver with the software
•
Select Position Table under 2. Control Mode:
•
Select the Linear tab under 3. Control Mode Settings:
