M2DC Series Hardware Manual
108
Rev. 1.1
2018/04
400-820-9661
• Click Edit for detailed motion configurations.
7.5.1.2 Basic Configuration
Point Counts:
Select the number of position Point Counts: 7, 15, 31, or 63.
Position type:
There are two types of point-to-point motion: Relative Position and Absolute Positon.
The following graphs illustrate the difference between Rleative positioning and Absolute positioning.
Example: Set the P1 position for 5 revs and the P2 position for 10 revs.
The difference between Relative Position and Absolute Position is shown below:
Position Unit:
Set Position Units as Counts or Lead.
