Mitsubishi Electric Melservo MR-J3-100B, Руководство пользователя

Страница: 295 / 590

Part 6: Common Reference Material
6 - 18
(2) Calculation of coasting distance
The figure shows the pattern in which the servo motor comes to a stop when the dynamic brake is
operated. Use equation 5.1 to calculate an approximate coasting distance to a stop. The dynamic brake
time constant
τ varies with the servo motor and machine operation speeds. (Refer to (1) of this section.)
A working part generally has a friction force. Therefore, actual coasting distance will be shorter than a
maximum coasting distance calculated with the following equation.
Dynamic brake
time constant τ
Time
t
e
V
0
ON
OFF
EM1 (Forced stop 1)
Machine speed
Dynamic Brake Operation Diagram
L
max
=
60
V
0
•
J
M
t
e
+ 1 + J
L
··························································································· (5.1)
L
max
: Maximum coasting distance ····················································································· [mm]
V
0
: Machine's fast feed speed ················································································· [mm/min]
J
M
: Moment of inertia of the servo motor ····························································· [× 10
-4
kg • m
2
]
J
L
: Load moment of inertia converted into equivalent value on servo motor shaft ········ [× 10
-4
kg • m
2
]
: Dynamic brake time constant ······················································································ [s]
t
e
: Delay time of control section ······················································································· [s]
For 7 kW or lower servo, there is internal relay delay time of about 10 ms. For 11 kW to 55 kW
servo, there is delay caused by magnetic contactor built into the external dynamic brake (about 50
ms) and delay caused by the external relay.
For MR-J3W-0303BN6 and MR-J4W2-0303B6 the processing delay time about 3.5 ms