manualshive.com logo in svg

Marvell PXA300, Руководство разработчика

Разработчики, вам доступен бесплатный загрузка Руководства пользователя Marvell PXA300 на {веб-сайте}. Это незаменимый источник информации для работы с продуктом. Загрузите свой экземпляр руководства прямо сейчас, чтобы использовать все возможности устройства.

Поделиться
Скачать
background image

69rlq62d-f714peg4 * Memec (Headquar

ter

s) - Unique 

Tec

h,

 Insight,

 Impact

MAR

VELL CONFIDENTIAL,

 UNDER ND

A# 12101050

69rlq62d-f714peg4 * Memec (Headquar

ter

s) - Unique 

Tec

h,

 Insight,

 Impact

MAR

VELL CONFIDENTIAL,

 UNDER ND

A# 12101050

69r

lq62d-f714peg4 * Memec (Headquar

ters) - Unique 

T

ech, Insight, Impact * UNDER ND

A# 12101050

MAR

VELL CONFIDENTIAL - UNA

UTHORIZED DISTRIB

UTION OR USE STRICTL

Y PR

OHIBITED

PXA300 Processor and PXA310 Processor 
Vol. I: System and Timer Configuration Developers Manual

                         

Doc. No. MV-TBD-00 Rev. A 

CONFIDENTIAL

 Copyright © 2006 Marvell

Page 88 

Document Classification: Proprietary Information

December 13, 2006, Preliminary

Not approved by Document Control.  For review only.

DF_ADDR<3:0>

Output

Data Flash Address—Low-order address bits for the current static memory access on 
the data flash interface. These signals provide the lowest four address bits during a burst 
transfer to eliminate the need for complete decoding with nLLA allowing higher 
performance.

ND_nCS1

ND_nCS0

Output

Third Party data Flash Chip Selects—Active low chip selects for Third Party data flash 
memory devices.

ND_CLE

Output

Data Flash Command Latch Enable—Connects to the CLE input of data flash memory 
devices. This signal is routed to the DF_CLE_nOE pin.

ND_ALE

Output

Third Party data ALE—Connects to the ALE input of Third Party data flash devices. 
This signal is routed to the DF_ALE_WE pin (alternate function 1).

RDY

Input

Variable Latency I/O Ready—An external VLIO device asserts RDY (high) when it is 
ready to transfer data.

LCD Controller Signals

L_DD<17:0>

Bidirectional

LCD Display Data—Transfers pixel information from the LCD controller to the external 
LCD panel. These pins become inputs driven by the panel during a read from a panel 
with an integrated frame buffer.

ML_DD<17:0>

Output

Low-Power Mode LCD Display Data—Transfers pixel information from the low-power 
(mini) LCD controller to the external LCD panel in the S0/D1 low-power mode.

L_CS

Output

LCD Chip Select—Chip select signal for LCD panels with an internal frame buffer.

L_FCLK_RD

Output

LCD Frame Clock—Frame clock used by the LCD display module to signal the start of a 
new frame of pixels that resets the line pointers to the top of the screen. This pin is also 
the vertical synchronization signal for active (TFT) displays.

This pin is the read signal during reads from a panel with an internal frame buffers.

L_LCLK_A0

Output

LCD Line Clock—Indicates the start of a new line. Also referred to as HSYNC for active 
panels. For LCDs with an internal frame buffer, this signal indicates a command or data 
transaction.

L_PCLK_WR

Output

LCD Pixel Clock—Pixel clock used by the LCD display module to clock the pixel data 
into the Line Shift register.

In passive mode, the pixel clock toggles only when valid data is available on the data 
pins.

In active mode, the pixel clock toggles continuously, and the AC bias pin is used as an 
output to signal when data is valid on the LCD data pins.

This pin also functions as a write signal for LCD panels with an internal frame buffer. 

ML_FCLK

Output

Low-Power Mode LCD Frame Clock—Vertical synchronization signal for active (TFT) 
displays in the S0/D1 low-power mode.

ML_LCLK

Output

Low-Power Mode LCD Line Clock—HSYNC for active panels in the S0/D1 low-power 
mode. 

ML_PCLK

Output

Low-Power Mode LCD Pixel Clock—Pixel clock for active TFT displays in the S0/D1 
low-power mode.

L_VSYNC

Input

LCD Refresh Sync—Sync input driven by LCDs with an internal frame buffer

L_BIAS

Output

LCD Bias Drive—AC bias used to signal the LCD display module to switch the polarity 
of the power supplies to the row and column axis of the screen to counteract DC offset. 
In active (TFT) mode, it is used as the output enable to signal when data should be 
latched from the data pins using the pixel clock.

Table 4-3. PXA300 Processors Signal Descriptions (Sheet 3 of 14)

Signal Name

Type

Signal Descriptions

Содержание PXA300





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PXA300

TECHWOOD TRO-1726 Instruction Manual preview
TRO-1726
Бренд: TECHWOOD Страницы: 16
WHALELOVE LS-BE617 Instruction Manual preview
LS-BE617
Бренд: WHALELOVE Страницы: 11
Essence HR7750 01 Service Manual preview
HR7750 01
Бренд: Essence Страницы: 6
Philips RI7633 Specifications preview
RI7633
Бренд: Philips Страницы: 2
Philips Pure Essentials Collection HR7774/30 Quick Manual preview
Pure Essentials Collection HR7774/30
Бренд: Philips Страницы: 2
Philips RI1396/01 Quick Start Manual preview
RI1396/01
Бренд: Philips Страницы: 3
Philips Jamie Oliver HR7782/00 Specifications preview
Jamie Oliver HR7782/00
Бренд: Philips Страницы: 3
Philips HR7761/00 Specifications preview
HR7761/00
Бренд: Philips Страницы: 3
Philips HR7759 User Manual preview
HR7759
Бренд: Philips Страницы: 6
Philips HR7755/01 Service Manual preview
HR7755/01
Бренд: Philips Страницы: 7
Philips HR7758/01 Service Manual preview
HR7758/01
Бренд: Philips Страницы: 8
Philips HR7745/80 Service Manual preview
HR7745/80
Бренд: Philips Страницы: 9
Philips HR7744/55 Serivce Data preview
HR7744/55
Бренд: Philips Страницы: 9
Philips RI7761/00 User Manual preview
RI7761/00
Бренд: Philips Страницы: 23
Philips HR7770 User Manual preview
HR7770
Бренд: Philips Страницы: 132
Philips HR7766 User Manual preview
HR7766
Бренд: Philips Страницы: 240
Barco CM 100 Manual preview
CM 100
Бренд: Barco Страницы: 19
Severtson Narrow Fixed Frame Series Instruction Manual preview
Narrow Fixed Frame Series
Бренд: Severtson Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды