Lenovo ThinkServer RD650, Руководство пользователя

Страница: 346 / 418

LSI Corporation
- 346 -
12Gb/s MegaRAID SAS Software User Guide

March 2014
Chapter 12: Using MegaRAID Advanced Software
LSI MegaRAID SafeStore Encryption Services
Figure 229 Enable Drive Security – Security Key Identifier
3. Either use the default security key identifier, or enter a new security key identifier.
NOTE If you create more than one security key, make sure that you change
the security key identifier. Otherwise, you cannot differentiate
between the security keys.
4. Either click Suggest Security Key to have the system create a security key, or you can enter a new security key.
5. Enter the new security key again to confirm.
CAUTION If you forget the security key, you will lose access to your data. Be
sure to record your security key information. You might need to enter
the security key to perform certain operations.
The security key is case-sensitive. It must be between 8 and 32 characters and contain at least one number, one
lowercase letter, one uppercase letter, and one non-alphanumeric character (e.g., < > @ +). The space character is
not permitted.
NOTE Non-U.S. keyboard users must be careful not to enter double-byte
character set (DBCS) characters in the security key field. The firmware
works with the ASCII character set only.
The following figure shows the security key entered and confirmed on this dialog.