manualshive.com logo in svg

Lenovo ThinkServer RD650, Руководство пользователя

Lenovo ThinkServer RD650 - надежный сервер для бизнеса. Пользователи могут скачать бесплатное руководство по эксплуатации (User Manual) с официального сайта. RD650 обеспечивает высокую производительность и надежность, идеально подходит для компаний любого масштаба. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

LSI Corporation

- 79 -

12Gb/s MegaRAID SAS Software User Guide

March 2014

Chapter 4: Ctrl-R Utility 

Viewing and Changing Device Properties

Table 21  Controller Settings

Options

Descriptions

Alarm Control

Select this option to enable, disable, or silence the onboard alarm tone generator on the controller. 

Coercion Mode

Use this option to force drives of varying capacities to the same size so they can be used in a drive 
group. The coercion mode options are None, 128MB-way, and 1GB-way. The number you choose 
depends on how much the drives from various vendors vary in their actual size.

BIOS Mode

Specifies the following options to set the BIOS boot mode:

Stop on Error

: shows the errors encountered during boot up and waits for your input. The 

firmware does not proceed with the boot process till you take some action

Bypass Error

: Ignores errors and the firmware proceeds with boot.

Headless Continue on Error

: the firmware may halt due to hardware faults. If the firmware 

encounters no hardware faults, then the boot up continues.

Headless Safe Mode

: Boots the controller to run on safe mode.

Boot Device

Use this option to select the boot device from the list of virtual drives and JBODs.

Rebuild Rate

Use this option to select the rebuild rate for drives connected to the selected controller. The rebuild 
rate is the percentage of system resources dedicated to rebuilding a failed drive. The higher the 
number, the more system resources that are devoted to a rebuild. The range of rebuild rate is 
between 0 and 100 percent.

BGI Rate

Use this option to select the amount of system resources dedicated to background initialization of 
virtual drives connected to the selected controller. The range of background initialization (BGI) rate is 
between 0 and 100 percent.

CC Rate

Use this option to select the amount of system resources dedicated to consistency checks of virtual 
drives connected to the selected controller. The range of Consistency Check (CC) rate is between 0 
and100 percent.

Recon. Rate

Use this option to select the amount of system resources dedicated to reconstruction of drives 
connected to the selected controller. The range of Recon rate is between 0 and100 percent.

Patrol Rate

Use this option to select the rate for patrol reads for drives connected to the selected controller. The 
patrol read rate is the percentage of system resources dedicated to running a patrol read. The range 
of patrol read is between 0 to 100 percent.

Cache Flush Interval

Use this option to control the interval at which the contents of the onboard data cache are flushed. 
The range of Cache Flush Interval is between 0 to100 seconds.

Spinup Delay

Use this option to control the interval (in seconds) between spinup of drives connected to this 
controller.

The delay prevents a drain on the system’s power supply that would occur if all drives spun up at the 
same time. The range of Spinup Delay is between 0 to 255 seconds.

Spinup Drive

Use this option to control the interval at which the contents of the onboard data cache are flushed. 
The range of Spinup Drive is between 0 to 255 seconds.

Maintain PD Fail History

Use this option to maintain the history of all drive failures. 

Enable Controller BIOS

Use this option to enable or disable the BIOS for the selected controller.

If the boot device is on the selected controller, the BIOS must be enabled. Otherwise, the BIOS should 
be disabled, or you might be unable to use a boot device elsewhere.

Enable Stop CC on Error

Use this option to stop a consistency check when the controller BIOS encounters an error.

Auto Enhanced Import

Use this option to import automatically at boot time.

Set Factory Defaults

Use this option to load the default Ctrl-R Utility settings.

Manage Link Speed

Use this option to change the link speed between the controller and the expander, or between a 
controller and a drive that is directly connected to the controller.

Manage Power Save

Use this option to reduce the power consumption of drives that are not in use, by spinning down the 
unconfigured good drives, hot spares and configured drives.

Содержание ThinkServer RD650



































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer RD650

NAIM HDX-SSD - Quick Start Manual preview
HDX-SSD -
Бренд: NAIM Страницы: 16
IBM System x3650 M5 Installation And Service Manual preview
System x3650 M5
Бренд: IBM Страницы: 1010
Black Box PCA35A-R3 User Manual preview
PCA35A-R3
Бренд: Black Box Страницы: 30
Data-Tronix DT-HDIPCOM Installation & Configuration Manual preview
DT-HDIPCOM
Бренд: Data-Tronix Страницы: 29
Data-Tronix DT-HDIPUS User Manual & Installation Manual preview
DT-HDIPUS
Бренд: Data-Tronix Страницы: 30
7th Sense Delta User Manual preview
Delta
Бренд: 7th Sense Страницы: 156
QNAP TS-253E User Manual preview
TS-253E
Бренд: QNAP Страницы: 58
Sun Oracle Netra SPARC T3-1BA Safety And Compliance Manual preview
Netra SPARC T3-1BA
Бренд: Sun Oracle Страницы: 62
Sun Oracle X3-2 Installation Manual preview
X3-2
Бренд: Sun Oracle Страницы: 182
Sun Oracle Fire X4440 Service Manual preview
Fire X4440
Бренд: Sun Oracle Страницы: 222
Sun Microsystems Fire V210 Administration Manual preview
Fire V210
Бренд: Sun Microsystems Страницы: 114
Sun Microsystems SPARC Series Service Manual preview
SPARC Series
Бренд: Sun Microsystems Страницы: 192
Sun Microsystems Sun Fire V480 Administration Manual preview
Sun Fire V480
Бренд: Sun Microsystems Страницы: 270
Meinberg LANTIME/SHS/BGT Manual preview
LANTIME/SHS/BGT
Бренд: Meinberg Страницы: 5
Supero SC835BTQ - R1K28B User Manual preview
SC835BTQ - R1K28B
Бренд: Supero Страницы: 86
Supero FatTwin F517H6-FT User Manual preview
FatTwin F517H6-FT
Бренд: Supero Страницы: 130
Intel SE7221BA1-E User Manual preview
SE7221BA1-E
Бренд: Intel Страницы: 56
Intel S5000VCL - Server Board Motherboard Technical Product Specification preview
S5000VCL - Server Board Motherboard
Бренд: Intel Страницы: 74

Бренды по названию

Популярные бренды

Загрузить еще бренды