Lenovo ThinkServer RD650 Скачать руководство пользователя страница 157

Страница: 157 / 418

LSI Corporation

- 157 -

12Gb/s MegaRAID SAS Software User Guide



March 2014

Chapter 6: StorCLI

StorCLI Command Syntax

NOTE

Run all the commands using the super user (sudo) login.

Run the command

sudo dpkg -i storcli_1.0_all.deb

for installing the Debian package.

Run the command

dpkg -l | grep -i storcli

for verifying if the Debian package was installed

successfully or not.

To uninstall the Debian package, run the command,

sudo dpkg –r storcli

6.4.4

Installing StorCLI on VMware Operating Systems

To install StorCLI on VMware operating systems, run the following syntax from the command line:

esxcli software vib install –v=<

path-to-vib-package

Example:

esxcli software vib install

-v=/vmfs/volumes/datastore1/StorCliMN/vmware-esx-StorCli-1.01.04.vib

6.4.5

Installing StorCLI on FreeBSD Operating Systems

The FreeBSD StorCLI binary is provided in a binary format, and no separate installation is required.

Copy the binary file from the CD or from the LSI website.

Place the binary file in the directory from which you want to run the Storage Command Line Tool, and run
the tool.

6.4.6

Installing StorCLI on Microsoft EFI

The EFI StorCLI binary is provided in a binary format, and no separate installation is required.

Copy the binary file from the CD or from the LSI website.

Place the binary file in the directory from which you want to run the Storage Command Line Tool, and run
the tool.

6.4.7

Installing StorCLI on Solaris Operating Systems

To install StorCLI on Solaris operating systems, run the following command:

pkgadd –d Storcli.pkg

6.5

StorCLI Command Syntax

This chapter describes the StorCLI command syntax and the valid values for each parameter in the general
command syntax.

NOTE

To get the output in JSON format, add

at the end of the command

syntax.

Example:

storcli /cx show <property1>|<property2>

Содержание ThinkServer RD650



































































































































































































































































































































































































































Результаты поиска

Содержание ThinkServer RD650

Отзывы:

Похожие инструкции для ThinkServer RD650

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD650, Руководство пользователя

Результаты поиска

Содержание ThinkServer RD650

Отзывы:

Похожие инструкции для ThinkServer RD650

Бренды по названию

Популярные бренды