manualshive.com logo in svg

Lenovo ThinkServer RD650, Руководство пользователя

Lenovo ThinkServer RD650 - надежный сервер для бизнеса. Пользователи могут скачать бесплатное руководство по эксплуатации (User Manual) с официального сайта. RD650 обеспечивает высокую производительность и надежность, идеально подходит для компаний любого масштаба. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

LSI Corporation

- 30 -

12Gb/s MegaRAID SAS Software User Guide

March 2014

Chapter 2: Introduction to RAID 

RAID Levels

2.2.5

RAID 5

RAID 5 includes disk striping at the block level and parity. Parity is the data’s property of being odd or even, and parity 
checking is used to detect errors in the data. In RAID 5, the parity information is written to all drives. RAID 5 is best 
suited for networks that perform a lot of small input/output (I/O) transactions simultaneously.

RAID 5 addresses the bottleneck issue for random I/O operations. Because each drive contains both data and parity, 
numerous writes can take place concurrently.

The following table provides an overview of RAID 5. The following figure provides a graphic example of a RAID 5 drive 
group.

Table 9  RAID 5 Overview

Figure 9  RAID 5 Drive Group with Six Drives

2.2.6

RAID 6

RAID 6 is similar to RAID 5 (disk striping and parity), except that instead of one parity block per stripe, there are two. 
With two independent parity blocks, RAID 6 can survive the loss of any two drives in a virtual drive without losing 
data. RAID 6 provides a high level of data protection through the use of a second parity block in each stripe. Use 
RAID 6 for data that requires a very high level of protection from loss.

In the case of a failure of one drive or two drives in a virtual drive, the RAID controller uses the parity blocks to 
re-create all of the missing information. If two drives in a RAID 6 virtual drive fail, two drive rebuilds are required, one 
for each drive. These rebuilds do not occur at the same time. The controller rebuilds one failed drive, and then the 
other failed drive.

The following table provides an overview of a RAID 6 drive group.

Uses

Provides high data throughput, especially for large files. Use RAID 5 for transaction processing applications 
because each drive can read and write independently. If a drive fails, the RAID controller uses the parity drive 
to re-create all missing information. Use also for office automation and online customer service that requires 
fault tolerance. Use for any application that has high read request rates but low write request rates.

Strong points

Provides data redundancy, high read rates, and good performance in most environments. Provides 
redundancy with lowest loss of capacity.

Weak points

Not well-suited to tasks requiring lot of writes. Suffers more impact if no cache is used (clustering). Drive 
performance is reduced if a drive is being rebuilt. Environments with few processes do not perform as well 
because the RAID overhead is not offset by the performance gains in handling simultaneous processes.

Number of Drives in 
this RAID level

3 through 32

.OTE0ARITYISDISTRIBUTEDACROSSALLDRIVESINTHEDRIVEGROUP

?

3EGMENT
3EGMENT
0ARITYn 
3EGMENT
3EGMENT
3EGMENT

3EGMENT
0ARITYn 
3EGMENT

3EGMENT

3EGMENT

3EGMENT

0ARITYn 
3EGMENT
3EGMENT
3EGMENT
3EGMENT
3EGMENT

3EGMENT
3EGMENT
3EGMENT

3EGMENT

0ARITYn 

3EGMENT

3EGMENT
3EGMENT
3EGMENT
3EGMENT
0ARITYn 
3EGMENT

3EGMENT
3EGMENT
3EGMENT
3EGMENT
3EGMENT
0ARITYn 

Содержание ThinkServer RD650



































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer RD650

IBM Power 750 Express Hardware Announcement preview
Power 750 Express
Бренд: IBM Страницы: 86
Supermicro SUPERSERVER 6021F User Manual preview
SUPERSERVER 6021F
Бренд: Supermicro Страницы: 116
Moxa Technologies ioLogik W5300 Series User Manual preview
ioLogik W5300 Series
Бренд: Moxa Technologies Страницы: 177
Cobalt Digital Inc Cobalt Qube 2 User Manual preview
Cobalt Qube 2
Бренд: Cobalt Digital Inc Страницы: 218
N-Tron ESERV-11T User Manual preview
ESERV-11T
Бренд: N-Tron Страницы: 55
Inspur NF5260FM6 User Manual preview
NF5260FM6
Бренд: Inspur Страницы: 82
Rackable Systems S3116-NAS Getting Started Manual preview
S3116-NAS
Бренд: Rackable Systems Страницы: 4
B&B Electronics VESR4x4 Quick Start Manual preview
VESR4x4
Бренд: B&B Electronics Страницы: 2
Buffalo TERASTATION HS-D1.0TGL/R5 Technical Specifications preview
TERASTATION HS-D1.0TGL/R5
Бренд: Buffalo Страницы: 2
Epson C12C823912 - Net 2 Print Server Start Here Manual preview
C12C823912 - Net 2 Print Server
Бренд: Epson Страницы: 20
Epson C823622A - Interface Type B Print Server Product Support Bulletin preview
C823622A - Interface Type B Print Server
Бренд: Epson Страницы: 3
Epson C12C800WN (Net 802.11b Wireless Print Server) Specifications preview
C12C800WN (Net 802.11b Wireless Print Server)
Бренд: Epson Страницы: 2
Epson C32C824461 - UB R03 Print Server Technical Reference Manual preview
C32C824461 - UB R03 Print Server
Бренд: Epson Страницы: 86
Epson C82362 Administrator'S Manual preview
C82362
Бренд: Epson Страницы: 279
Epson C823622A - Interface Type B Print Server Brochure preview
C823622A - Interface Type B Print Server
Бренд: Epson Страницы: 2
Fujitsu PRIMERGY TX2540 M1 Operating Manual preview
PRIMERGY TX2540 M1
Бренд: Fujitsu Страницы: 92
Fujitsu PRIMERGY TX200 S5 Operating Manual preview
PRIMERGY TX200 S5
Бренд: Fujitsu Страницы: 114
Fujitsu PRIMERGY TX300 S5 Options Manual preview
PRIMERGY TX300 S5
Бренд: Fujitsu Страницы: 142

Бренды по названию

Популярные бренды

Загрузить еще бренды