Lenovo ThinkServer RD650, Руководство пользователя

Страница: 224 / 418

LSI Corporation
- 224 -
12Gb/s MegaRAID SAS Software User Guide

March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing and Configuring an SNMP Agent

Start:
# svcadm enable svc:/application/management/sma:default

Stop:
# svcadm disable svc:/application/management/sma:default

Restart:
# svcadm restart svc:/application/management/sma:default

Status:
# svcs svc:/application/management/sma:default
The following commands are used to start, stop, restart, and check the status of the Solaris System Management
Agent (net snmpd) daemon on Solaris 11 x86:

Start:
# svcadm enable svc:/application/management/net-snmp

Stop:
# svcadm disable svc:/application/management/net-snmp

Restart:
# svcadm restart svc:/application/management/net-snmp

Status:
# svcs svc:/application/management/net-snmp
NOTE
Online
indicates that the SMA is started.
Disabled
indicates that
the SMA is stopped.
The following commands are used to start, stop, restart, and check the status of the SAS SNMP Agent daemon on
Solaris 10 x86, Solaris 10 SPARC, and Solaris 11 x86:

Start:
#/etc/init.d/lsi_mrdsnmpd start

Stop:
#/etc/init.d/lsi_mrdsnmpd stop

Restart:
#/etc/init.d/lsi_mrdsnmpd restart

Status:
#/etc/init.d/lsi_mrdsnmpd status
7.6.5.5 Configuring snmpd.conf
By default, you can run the SNMP queries (walk, get) from any remote machine without any changes to the
snmpd.conf
file. To quickly add a new community and client access, perform the following steps:
1. Stop the SMA service by running the following command:
# svcadm disable svc:/application/management/sma:default
2. Add read-only and read-write community names.
a. Add a read-only community name and client/hostname/ipaddress under
SECTION: Access Control
Setup
in the
/etc/sma/snmp/snmpd.conf
file, as shown in the following excerpt.
#################################################
# SECTION: Access Control Setup
# This section defines who is allowed to talk to
# your running SNMP Agent.
# rocommunity: a SNMPv1/SNMPv2c read-only access
# community name
# arguments: community
# [default|hostname|network/bits] [oid]
# rocommunity snmpclient 172.28.157.149
#################################################
NOTE In Solaris 11 x86, add a read-only community name and
client/hostname/ipaddress under "SECTION: Access Control Setup" in
the
/etc/net-snmp/snmp/snmpd.conf
file as shown in the
above excerpt.
b. Add a readwrite community name and client, hostname, ipaddress under
SECTION: Access Control
Setup
in
/etc/sma/snmp/snmpd.conf
file, as shown in the following excerpt.
#################################################
# SECTION: Access Control Setup
# This section defines who is allowed to talk to your