Lenovo ThinkServer RD650, Руководство пользователя

Страница: 223 / 418

LSI Corporation
- 223 -
12Gb/s MegaRAID SAS Software User Guide

March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing and Configuring an SNMP Agent
NOTE To receive a trap in a local machine with Net-SNMP version 5.3, you
must modify the
snmptrapd.conf
, file (generally located at
/var/net-snmp/snmptrapd.conf
). Add
disableAuthorization yes
in
snmptrapd.conf
and then
run
sudo snmptrapd -P -F "%02.2h:%02.2j TRAP%w.%q
from %A %v\n
.
NOTE It is assumed that snmpd.conf is located in
/etc/snmp
for the Red
Hat operating system and
/etc
for the SLES operating system. You
can change the file location from the
/etc/init.d/lsi_mrdsnmpd
file.
You can install SNMP without the trap functionality. To do so, set the TRAPIND environment variable to
"N"
before
running RPM.
Before you install a new version, you must uninstall all previous versions.
For the SLES 10 operating system, perform the following steps to run SNMP:
1. Copy
/etc/snmp/snmpd.conf
to
/etc/snmpd.conf
.
2. Modify the
/etc/init.d/snmpd
file, and change
SNMPDCONF=/etc/snmp/snmpd.conf
entry to
SNMPDCONF=/etc/snmpd.conf
.
3. Run
LSI SNMP rpm
.
7.6.5 Installing and Configuring an SNMP Agent on Solaris
This section explains how to install and configure SAS SNMP Agent for the Solaris operating system.
7.6.5.1 Prerequisites
This package requires that you have Solaris System Management Agent installed on the Solaris machine.
NOTE While installing the SAS SNMP Agent on Solaris 11, the net-snmp
package needs to be installed on the machine.
7.6.5.2 Installing SNMP on Solaris
To install SNMP for the Solaris operating system, perform the following steps:
1. Unzip the LSI SAS SNMP Agent package.
2. Run the install script by using the following command:
# ./install.sh
The installation exits if any existing versions of storelib and sassnmp are installed on the Solaris machine. Uninstall the
existing version by using the following commands:
# pkgrm sassnmp
(to uninstall the LSI SAS SNMP Agent)
# pkgrm storelib
(to uninstall storelib library)
7.6.5.3 LSI SAS SNMP MIB Location
After you install the LSI SAS SNMP Agent package, the MIB file
LSI-AdapterSAS.mib
is installed under
/etc/lsi_mrdsnmp/sas
directory.
7.6.5.4 Starting, Stopping, and Checking the Status of the LSI SAS SNMP Agent
The following commands are used to start, stop, restart, and check the status of the Solaris System Management
Agent (net snmpd) daemon on Solaris 10 x86 and Solaris 10 SPARC: