LAWO mc256 MKII, Техническое руководство

Страница: 132 / 372

mc²56 MKII Technical Manual V5.10.2/1 132
Chapter 3: AdminHD
Core Configuration: Defining the System
Core Configuration: Defining the System
This section looks at adding or removing components to/from the Core configuration - for example to add a new
DALLIS or plug-in card.
To change parameters for existing components or signals, skip straight to Editing Parameters .
The same principles apply whether you are updating an existing configuration or building a new system from
scratch. The system is hierarchical, and therefore components must be added in the following order. Note that
steps 1 and 2 do not apply to the mc
2
36, Nova37 or mc
2
MicroCore, as both the Core and its modules are
predefined when you start a New configuration.
1. Define the Core .
2. Fit modules to the Core.
3. Define the I/O ports : for example, to configure a DALLIS, Compact I/O, Virtual Device or Tie-Lines.
4. Fit cards to a DALLIS.
5. Define other options such as Link and Port redundancy , and Port DSP resources .
You should open both the 'Core Browser' and 'Hardware Panel' to perform these tasks.
Warning
It is vital that the configuration matches your intended physical installation. Otherwise components may not
operate correctly. Therefore, it is useful to have the specification details (part numbers and options) to hand.