LAWO mc256 MKII, Техническое руководство

Страница: 206 / 372

mc²56 MKII Technical Manual V5.10.2/1 206
Chapter 3: AdminHD
Core Configuration: Parameters
Super-Device
Super-Device is the generic term used to describe the I/O port's definition : DALLIS , Tie-Line , Compact I/O , etc.
The parameters depend on the device type and its connection.
General Parameters
Tie-Line DALLIS (connected via MADI)
Super-device alias Enter an alias name for the device.
Model number & Type These fields are for information purposes only and cannot be edited. They describe the
serial number (of a DALLIS frame) and the type of Super-device.
Redundant PSU Tick this box to add a redundant PSU to the DALLIS frame.
Audio channels IN left
Audio channels OUT
left
These two boxes cannot be edited and show the number of 'free' audio channels left in
the DALLIS frame. These are channels which could be used by fitting additional plug-in
cards.)
RAVENNA Net Devices Only
DALLIS (connected via RAVENNA Net) Virtual Device (A_mic8)
Role name Enter the RAVENNA Role name - this must match the Role name defined and stored
on the connected device.
TX stream name
(RV DALLIS only)
Enter the RAVENNA Transmission stream name (required for IP-SHARE
TM
Gain
Compensation ).
Static routing IP
(Virtual Devices only)
Enter the IP address of the Virtual Device's streaming port. This must match the IP
address stored on the device itself (defined by the preconfig script).
Note that for other devices, the Static routing IP is entered under Masterboard .