LAWO mc256 MKII, Техническое руководство

Страница: 186 / 372

mc²56 MKII Technical Manual V5.10.2/1 186
Chapter 3: AdminHD
Signal List Configuration
Generating a Signal List from the Core Configuration
This operation adds all the directories and signals from the Hardware Tree into the Directories & signals
column, and can be used to quickly generate a Signal List from your hardware components.
It is a good idea to add this structure below your "user" directories, so that service technicians can easily
locate signals using the
Hardware Tree naming structure.
1. Click on ( Generate automatic tree view from config ) from the 'Signal List Editor' toolbar - all the
directories and signals from the Hardware Tree are added to the bottom of the Directories & signals column:
The structure uses the alias names (if entered). Otherwise, default system names are used to describe each
component – for example, MO4PO1DAL60 :
·
MO4 – indicates the Nova73 Module (e.g. Module 4).
·
PO1 – indicates the port on the Module (e.g. Port 1).
·
DAL60 - indicates the device on the port (e.g. a DALLIS Device with 60 audio
2. The button can be selected multiple times to repeat the structure.
For example, you might add the structure twice; leave the lower structure unchanged (for your "service
view"), and then
edit the upper structure to provide more "user friendly" directory and subdirectory names.