LAWO mc256 MKII, Техническое руководство

Страница: 211 / 372

mc²56 MKII Technical Manual V5.10.2/1 211
Chapter 3: AdminHD
Core Configuration: Parameters
Signal Out -> Signal
Signal Out parameters depend on the type of signal (Line, AES, SDI, etc.). Below are two examples. See also
SDI Parameters .
Line Signal Out Parameters AES Signal Out Parameters (with SRC)
HLSD See Signal In: HLSD .
Signal name See Signal In: Name .
Signal label See Signal In: Label .
Group See Signal In: Group .
Sampling frequency
Word length
SRC
For AES cards with SRC only.
Sets the sample rate and word length for the output.
Note that the SRC field cannot be edited and shows the status of the sample rate
converter. To disable the SRC, you must set the Sampling frequency to System and
Word length to 24 -bit. For all other combinations, SRC is always enabled.
Users can change these parameters later, from the console GUI's Signal Settings
display.
AES consumer format For AES cards released after 2006.
Sets the channel status of the AES output to either Consumer or Professional .
Please refer to the AES3 standard definition for details.
For details on an individual card's parameters, please refer to the relevant data sheet available in the
"
mc2_Nova73_documentation " guide.
To make a digital path suitable for Dolby E operation, you should turn off the I/O DSP for both the input and
output, and disable any sample rate conversion.