LAWO mc256 MKII, Техническое руководство

Страница: 125 / 372

mc²56 MKII Technical Manual V5.10.2/1 125
Chapter 3: AdminHD
Core Configuration: First Steps
Checking the Configuration
Having completed your AdminHD configuration, it is a good idea to check it for programming errors. This will avoid
any problems later when you upload to the system.
1. Select Extras -> Check Configuration from the main menus , or press CTRL + K on your computer
keyboard:
AdminHD analyses the configuration to check for the following errors:
·
Signal HLSD Conflicts – if two signals have the same HLSD (Lawo system address).
·
HLSD Syntax – if there is an invalid HLSD in the configuration.
·
Signal Name Conflicts – if two signals have the same name .
·
Mapping Table Address Conflicts – if you have assigned the same mapping table address to different
signals.
The result of the check is displayed within the status bar of the display:
If an error is reported, then try retracing your steps by opening an earlier version of the config.csv .