LAWO mc256 MKII, Техническое руководство

Страница: 348 / 372

mc²56 MKII Technical Manual V5.10.2/1 348
Chapter 7: Appendices
SFP Modules & Installation
SFP Modules & Installation
The following SFP transceivers are available for the relevant MADI and RAVENNA ports. Note that all transceivers
must be Lawo-certified (as listed below).
MADI Ports
Options include multi-mode and single-mode fibre, and standard coaxial cable. For more details, please refer to
the module's data sheet.
SFP Module Description Part Number
MADI, multi-mode fibre 981/60-80
MADI, single-mode fibre 981/60-81
MADI, coaxial/electrical 981/60-82
RAVENNA Ports
Options include multi-mode and single-mode fibre. For more details, please refer to the module's data sheet.
SFP Module Description Part Number
1000 BASE SX: 850nm, -7dBm, multi-mode fibre, 550m 981/60-10
1000 BASE LX: 1310nm, -3dBm, single-mode fibre, 10km 981/60-20
1000 BASE ZX: 1550nm, 0dBm, single-mode fibre, 80km 981/60-30
CWDM: 1270-1610nm, single-mode fibre; up to 40km 981/60-40 to 981/60-57
Installing the SFPs
If fitting transceivers to both the MADI and RAVENNA, take care not to mix up the SFP module types.
The SFP transceivers are hot-pluggable. To install, remove the dust caps from both the port and SFP module.
Then, push the module into the rectangular slot. Press gently and firmly until the module locks into position.
Warning
CAUTION : Please unlock the transceiver before removing to avoid mechanical damage to the slot.
If the transceiver is removed, please refit the port's dust cap to protect the internal components.
Make sure you use the correct fibre type for your device. Using the wrong fibre type or exceeding the
maximum optical input power can result in malfunction of, or damage to, the optical device.