LAWO mc256 MKII, Техническое руководство

Страница: 65 / 372

mc²56 MKII Technical Manual V5.10.2/1 65
Chapter 2: Installation
System Connections
Ethernet A
This port connects the console control surface to the control system on the Nova73 Router Module MKII (980/33).
Connections are made via TCP/IP Ethernet. Only one connection (to the active Router Module) is essential for
operation; the second is required if a redundant Router Module is fitted:
Use a straight (1:1) network cable (STP-CAT 5 with RJ45 connectors):
1. Connect either of the control surface ETH A ports (on the rear connector panel ) to the first Nova73 Router
Module.
·
On the control surface, you can use either port ( ROUTER 1 or ROUTER 2 ).
·
On the Nova73, make sure you connect to ETHERNET A (and not ETHERNET B ).
Control Surface Rear Nova73 Router Module MKII Front
2. If a redundant Router Module is fitted to the Nova73, then run a second network cable from the spare
control surface port ( ROUTER 1 or ROUTER 2 ) to the redundant Router Module ( ETHERNET A ).
This second connection is essential to support control system redundancy .
3. You can now power on to boot and check the system, or continue with the rest of the system wiring.