Kyocera Mita DC-1560, Руководство по обслуживанию

Страница: 81 / 289

1AF
2-1-2
Figure 2-1-2 Layout of electrical parts: switches and sensors
1. Main switch (MSW) ............................................ Turns the AC power on and off.
2. Safety switch 1 (SSW1) ..................................... Breaks the safety circuit when the
front cover is opened, and resets
paper jam detection.
3. Safety switch 2 (SSW2) ..................................... Breaks the safety circuit when the
eject cover is opened, and resets
paper jam detection.
4. Drawer switch (CASDSW) ................................. Detects the presence or absence
of the paper drawer.
5. Bypass paper length switch (BYPPLSW) .......... Detects the length of paper on the
bypass table.
6. Bypass paper width switch (BYPPWSW) .......... Detects the width of paper on the
bypass table.
7. Bypass table extended detection switch
(BYPEDSW) ...................................................... Detects when the bypass table is
extended to use long paper.
8. Registration switch (RSW) ................................. Controls the secondary paper
feed start timing.
9. Eject switch (ESW) ............................................ Detects a paper jam in the fixing
section.
10. AE sensor (AES) ................................................ Detects the original density.
11. Home position switch (HPSW) ........................... Detects the scanner in the home
position.
12. Lens home position switch (LHPSW) ................ Detects the lens in the home
position.
13. Toner cartridge detection switch 1
(TCDSW1) ......................................................... Detects the presence or absence
of the toner cartridge.
11
3
9
8
4
2
1
5
7
6
20
17
18
12 10
14
16
15
13
19
Machine front Machine inside Machine rear