Kyocera Mita DC-1560, Руководство по обслуживанию

Страница: 106 / 289

3-1-7
1AF
Remove the tapes and spacers.
1. Detach the original holder and remove the paper from the contact glass.
2. Remove the tape on the top rear of the machine.
3. Refit the original holder.
4. Remove the tapes holding the insertion guides of the bypass table.
5. Remove the tape and right spacer.
Tape
Tapes
Right spacer
Insertion guides
Figure 3-1-7
6. Open the front cover and remove the tapes and the four spacers.
Remove the tape holding the cleaner tab.
Lower hinge spacer
Upper hinge spacer
Image formation unit spacer
Tape
Cleaner tab
Inner spacer
Figure 3-1-8