Kyocera Mita DC-1560, Руководство по обслуживанию

Страница: 226 / 289

1AF
3-4-2
14 Setting the folio size
22 Adjusting the auto exposure reference value
24 Setting the exposure amount
25 Adjusting lateral magnification
26 Adjusting longitudinal magnification
27 Adjusting leading edge registration timing
28 Setting the lens unit rank
29 Adjusting exposure amount for enlargement/reduction mode
31 Setting transfer voltage
32 Setting the drum potential
46 Setting the fixing temperature
47 Setting the fixing preheat temperature
52 Adjusting ADF leading edge registration timing
54 Adjusting the leading edge margin
55 Adjusting the side erasure
59 Adjusting the trailing edge blank cut
62 Adjusting the toner sensor control voltage
71 Setting the maintenance cycle
72 Checking/clearing the maintenance count
73 Checking/clearing service call records
74 Checking/clearing jam counts
76 Checking/clearing the service call counts
77 Checking/clearing the paper feed counts
80 Selecting between double/single counts
81 Setting initial exposure mode
82 Selecting between manual/auto modes
83 Selecting the exposure scale
84 Setting the auto clear time
85 Setting the auto preheat time
86 Setting the auto shutoff time
Sim. No. Contents
• After installing the new NVRAM:
7. Insert the power plug and turn the main switch on.
8. Enter simulation mode.
9. Run simulation 70.
10. Run simulation 93 to select the destination.
Caution: Running simulation 93 changes the user’s drawer paper size setting as
follows.
11. Run the following simulations to reenter or check the data recorded on the simulation
label.
93 Destination setting Drawer paper size setting
Inch specifications 11"
×
8
1/2
"
Metric specifications A4