Korg NAUTILUS Series, Руководство по параметрам, Страница: 563 / 961

SEQUENCER: Page Menu Commands Copy To MIDI Track
553
If you wish to, you can continue “putting” the pattern. To
exit the command, press the
Exit button .
Copy To MIDI Track
This command copies the specified area of musical data
from the specified pattern to a MIDI track as musical data.
Unlike the Put To MIDI Track command, this command
actually writes the musical data of the pattern into the MIDI
track, so that you can edit the copied data in the track. Even
if you later edit the copy source pattern, the musical data of
the song will not be affected.
When you execute the Copy To MIDI Track command, the
musical data will be affected as follows.
• Musical data previously existing in the copy destination
measures will be erased.
• The musical data that is copied will playback according
to the time signature specified at the copy destination
measures.
The procedure is the same as for the Put To MIDI Track
command. For more information, see “Put To MIDI Track”
on page 552.
Convert to Drum Track Pattern
This command converts a user pattern into a user Drum
Track pattern, which can then be used with the Drum Track
in any mode. The converted Drum Track pattern will be
preserved in the NAUTILUS’s memory even when the
power is turned off, so you can manage it together with the
Programs and Combinations.
1. Use Pattern and Pattern Select to select the pattern
you’d like to convert.
2. Select the Convert to Drum Track Pattern menu
command to open the dialog box.
3. Use the To Drum Track Pattern Select field to specify
the destination User Drum Track pattern.
Note that, when the command is executed, any data in this
pattern will be overwritten.
4. If you check the All Patterns available in Song ***
item, all patterns in the song that contain note events
will be copied, starting at the number you specified in
step 3.
5. If you execute with Note Only checked, only the note
events will be copied.
6. Press the OK button to execute Convert To Drum
Track Pattern, or press the Cancel button if you
decide not to continue.
If there isn’t enough drum pattern memory, or if there
aren’t enough pattern locations, an error message of “Not
enough Drum Track pattern memory” or “Not enough
Drum Track pattern locations available” will appear, and
the command cannot be executed.
Tip: It’s a good idea to convert drum patterns that you use
frequently. Use Load Drum Track Pattern to load them.
Load Drum Track Pattern
This command loads a user drum track pattern into a user
pattern.
If you want to edit a user drum track pattern, you must first
load it into a Song pattern. Once it’s in a pattern, you can edit
it. After editing, you can use
Convert to Drum Track
Pattern to save it as a user drum track pattern.
1. Select Load Drum Track Pattern to open the dialog
box.
2. Use Select Range From (Drum Track) and To (Drum
Track) to specify the copy-source user drum track
pattern.
The user drum track patterns between From and To will be
loaded. If you want to load only one pattern, set From and
To to the same number.
When you execute this command, the data will be
overwritten onto the copy-destination number.
3. Use Load to (Song ***) to specify the load-destination
user pattern number.
4. Press the OK button to execute the Load Drum Track
Pattern command, or press the Cancel button if you
decide not to execute.
Copy External Scene
Please see “Copy External Scene” on page 121.
Copy Scene
Please see “Copy Scene” on page 121.
Swap Scene
Please see “Swap Scene” on page 122.
Copy Insert Effect
Please see “Copy Insert Effect” on page 122.
1 4 3 2
1 4 3 2
Pattern 41
Example: Copy the musical data of pattern 41 to measure 2
Before Copy
After Copy