manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 451 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 451

Sequencer Overview    Setup parameters & Musical data

441

Common section

• As the MIDI clock master, you can choose either 

Internal, External or Auto, letting you synchronize the 
NAUTILUS with other MIDI equipment.

• For each song, three-band EQ is provided on each MIDI 

track and each audio track.

• For each song, you can use twelve stereo insert effects, 

two stereo master effects, and two stereo total effects.

• When you’ve created songs, you can resample them to 

drive to create WAVE files.

• In addition to the song name, you can assign names to 

each pattern, track, and region.

• You can use the LOCATE button to move immediately 

to the desired location.

Setup parameters & Musical data

Each song consists of MIDI tracks 1–16, a master track, 
audio tracks 1–16, various song parameters such as the song 
name, settings for the 

vector

 function, settings for 

Arpeggiator, effect settings, RPPR parameters, and 100 user 
patterns.

Up to 200 such songs can be created in the NAUTILUS.

MIDI tracks 1–16 and audio tracks 1–16 each consist of 
“track parameters” that specify the starting state of the track, 
and “playback data.” The master track consists of tempo and 
time signature data.

MIDI tracks 1–16

Setup parameters

Bank/Program No.*, Play/Rec/Mute, Pan*, Volume*

Track Play Loop, Loop Start Measure, Loop End Measure, 
Play Intro, EQ (Bypass, Low Gain, Mid Frequency, Mid 
Gain, High Gain) Status, MIDI Channel, Bank Select (When 
Status=EX2), Track Priority, Force OSC Mode, OSC Select, 
Portamento*, Transpose**, Detune**, Bend Range**, Use 
Program’s Scale, Delay (Mode, Time, Base Note, Times), 
Wave Sequence (Key Sync, Swing, Quantize Trigger), ARP 
Track On/Off Control, MIDI Filter, Key Zone, Velocity 
Zone, Track Name, IFX/Indiv.Out Bus, FX Control Bus, Rec 
Bus, Send1(MFX1)*, Send2(MFX2)*, DKit, Drum Kit IFX 
Patch

* and **: see “Automating MIDI setup parameters,” below.

Musical data

Note On/Off
Program Change (including Bank Select)
Pitch Bend
After Touch (and Poly Aftertouch)
Control Change
Pattern No.
Exclusive Messages (SysEx)

Automating MIDI setup parameters

Most of the setup parameters can be automated simply by 
changing them while recording into a MIDI track in real-
time. Changing the parameter sends a MIDI message, and 
when that MIDI message is played back, the parameter 
changes accordingly.

Setup parameters marked with a single asterisk * transmit 
and receive specific MIDI messages, such as CCs.

Setup parameters marked with two asterisks ** respond to 
MIDI RPN messages, and also send and receive MIDI 
System Exclusive messages.

The other setup parameters transmit and respond to MIDI 
System Exclusive messages.

• For details on Control Change messages and RPN, see 

“NAUTILUS and MIDI CCs” on page 921, and “Using 
RPN (Registered Parameter Numbers)” on page 933.

• For details on MIDI System Exclusive messages, see 

“System Exclusive events supported in Sequencer mode” 
on page 557.

Master track

Setup parameters/Musical data

Time signature, Tempo

Both Time signature and Tempo can be automated, simply 
by changing them in real-time during recording. Any 
changes are recorded into the Master Track. 

Audio tracks

Setup parameters

Rec Source, Play/Rec/Mute***, Pan***, Volume*** 
EQ (Bypass***, Low Gain***, Mid Frequency***, Mid 
Gain***, High Gain***), Delay (Mode, Time, Base Note, 
Times), Track Name, IFX/Indiv.Out Bus, FX Control Bus, 
Rec Bus, Send1(MFX1)***, Send2(MFX2)***

Musical data

Audio events
Automation events

Automating Audio setup parameters

All of the Audio setup parameters can be automated simply 
by changing them while recording in real-time. Some use 
audio automation data, while others use MIDI System 
Exclusive messages.

Setup parameters marked with three asterisks *** generate 
and respond to audio automation data. You can record 
changes to these parameters into audio tracks, in real-time.

The other setup parameters transmit and respond to MIDI 
System Exclusive messages. You can adjust these 
parameters during realtime recording, and record the 
resulting MIDI System Exclusive messages into a MIDI 
track.

WAVE files, regions, and audio events

The data recorded on an audio track consists of a WAVE file, 
a “region” containing information specifying the section of 
the WAVE file that will actually be played, and an “audio 
event” containing data that specifies the locations in the song 
at which that region will start and stop.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов