manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 959 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 959

Restoring the system and factory sounds    Notice: Use of GPL and LGPL software

949

Restoring the system and factory sounds

If for some reason the NAUTILUS will not start up 
normally, or some other problem occurs, you can use the 
recovery disc to return the NAUTILUS to its factory-preset 
state.

Note: 

You will need a commercially-available external USB-

connected DVD drive. Download the recovery disk image 
file from the Korg website, and burn the image to 
commercially-available DVD-R media from your computer.

Important - save your data before proceeding!

All of the Restore functions will erase all of the Programs, 
Combis, Drum Kits, Wave Sequences, Set Lists, Global 
settings, and other user data in the internal memory. Some of 
the functions will also erase data from the FACTORY 
directory on the hard drive, or even erase the hard drive 
entirely, as detailed below.

If you have any data that you want to keep–including data 
stored on the hard drive as well as data in the internal 
memory–we strongly recommend that you save it to a CD-
R/RW disk, or to external USB media, before proceeding. 
For instance, use the Save All or Save .PCG commands to 
save the contents of the internal memory.

Contents of the Recovery Discs

Accessory Discs 1 and 2

This disc is only for use by the restore functionality, and do 
not include any user-readable data.

Accessory Disc 3

This is the only disc with user-readable data, as described 
below. In addition to the data used for the restore 
functionality, it contains the following:

•

FACTORY directory:

 This contains original factory 

sounds, including Programs, Combinations, Wave 
Sequences, Drum Kits, Set Lists, Global Settings, etc. 
These are used by the Restore feature, but you can also 
load them directly in MEDIA mode.

•

licenses directory

: This contains the Korg NAUTILUS 

software license, in both English and Japanese, along the 
open-source GPL and LGPL licenses (in English).

•

src directory

: This contains the source code applicable 

to the GPL and LGPL licenses.

•

manuals directory

: This contains various NAUTILUS 

documentation, including the Operation Guide and 
Parameter Guide, the Voice Name List (VNL), and so 
on.

• MIDI Implementation

• Catalog

•

Mac directory: 

This contains NAUTILUS external 

setups, the Korg USB MIDI driver installer, and the 
Software Licensing Agreement.

•

Windows directory: 

This contains NAUTILUS external 

setups, the Korg USB MIDI driver installer, and the 
Software Licensing Agreement.

NOTE:

 Only the FACTORY directory can be used directly 

on the NAUTILUS. All of the files in the other directories 
can only be read from a computer.

Restoring the NAUTILUS factory data

You can use the Restore function to restore the factory 
sounds (Programs, Combis, etc.), to initialize the internal 
memory, or to restore the operating system to its original 
state. These three options will not alter any user data stored 
on the disk, as long as it is not stored in the FACTORY 
folder.

If absolutely necessary, you can also re-format the entire 
internal hard disk, and then restore the operating system and 
factory sounds. This will destroy all user data on the internal 
hard disk, and may require re-authorization of the 
NAUTILUS before it can be used again–so be careful!

To use the Restore function:

1. Disconnect all external USB devices from the 

NAUTILUS, except for a DVD drive.

External USB devices other than the DVD drive may 
interfere with the restoration process.

2. Insert Accessory Disc 1 into a connected USB DVD 

drive.

3. Turn off the NAUTILUS. Wait for about ten seconds, 

and then power-on again.

Be sure to wait for about ten seconds before you turn on 
the power.

4. A dialog box will appear. Use the +, – buttons, the 

VALUE dial, or 

numeric keys

 to choose one of the 

following options:

1. Format and Full Install
2. Full Install
3. Install Factory Sounds
4. Initialize Memory
See below for complete descriptions of each option.
If the disk is not formatted properly for the NAUTILUS, 
then the above menu is not shown. Instead, the following 
message will be displayed:
“The disk is not formatted for the NAUTILUS”
In this case, the only option offered is to perform a format 
and full install.

5. Press the ENTER button to carry out the selected 

Restore function, or press EXIT to stop the process 
without altering any data.

After pressing 

ENTER, 

an “Are you sure?” message will 

appear. If you are sure you want to proceed, press the 
ENTER button again. You can also cancel, without 
altering any data, by pressing the EXIT button.

6. After pressing ENTER, the restore program will start 

up. Follow the instructions that appear in the screen.

You’ll be asked to insert different DVD discs, depending 
on the option you chose in step 4. When a disc is 
requested, insert the appropriate disc, and then press the 
ENTER button. The entire process may take some time.

Do not touch the front-panel controls or turn off the 
power while the Restore is underway, except for pressing 
ENTER and EXIT as prompted by the on-screen 
instructions.

7. When the restore operation is complete, the following 

message will appear:
Installation Completed!

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов