Korg NAUTILUS Series Скачать руководство пользователя страница 172 | Manualshive

Страница: 172 / 961

Korg NAUTILUS Series Скачать руководство пользователя страница 172

EXi: AL-1 Analog Synthesizer

162

PROGRAM > AL-1: Amp

These pages let you control the sound’s volume (also called
“amplitude,” or “amp” for short), pan, and Drive, as well as
its dedicated amp envelopes and keyboard tracking
generators. For instance, you can:

• Set up the Driver circuit, which adds saturation and bass

boost to the timbre.

• Set the pan position and pan modulation.

• Control amp level and modulation, including keyboard

tracking, the amp envelope, LFO modulation, and AMS
control.

6–1: Amp/Driver

This page controls the basic settings for the Amp section.
Here, you can:

• Set up the Driver circuit.

• Set the initial volume level.

• Control the pan position and pan modulation.

6–1a: Driver

The Driver adds saturation and overdrive to the sound, for
everything from subtle fattening to drastic distortion. Unlike
an overdrive effect, the Driver processes each voice
individually, so the timbre stays the same regardless of how
many voices are being played.

The two main parameters, Drive and Low Boost, work
together to create the overall Driver effect. Drive contributes
edge and bite, and Low Boost provides the body as well as
boosting the bass.

Although the oscillators themselves have extremely low
aliasing, the Driver can produce aliasing–especially at
higher frequencies. If your goal is a completely pristine
sound, set the Driver’s

Bypass

to

On

. Otherwise, let it

rip!

Bypass

[Off, On]

When

Bypass

is

On

, the Driver is completely removed from

the signal path.

Drive

[0…99]

This controls the amount of edge and bite in the timbre. Low
settings will produce mild saturation, and higher settings
create more obvious distortion.

Often, it’s useful to increase the

Low Boost

along with the

Drive

.

Note:

Even when the

Drive

amount is set to 0, the Driver

circuit still affects the timbre. If your goal is a completely
pristine sound, use the Bypass control instead.

AMS

[List of AMS Sources]

This selects an AMS modulation source to control the

Drive

amount. For a list of AMS sources, see “Alternate
Modulation Source (AMS) List” on page 901.

Intensity

[–99…+99]

This controls the depth and direction of the AMS modulation
for

Drive

.

Low Boost

[0…99]

This low-frequency EQ controls the body character of the
sound. The specific EQ frequencies affected will change
with the

Drive

setting.

Higher amounts increase the bass boost, and will also
intensify the effect of the

Drive

parameter.

6–1PMC

6–1a

6–1b

6–1c

«
...
170
171
172
173
174
...
»

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов