manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 577 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 577

SET LIST > Edit    1–1: Edit

567

Set List Slot Volume

Hold Time

[0…60 seconds]

Hold Time

 controls the duration of Smooth Sound 

Transitions. It sets how long reverbs, delays, and note 
releases continue to ring out after a new sound has been 
selected. The timer starts after all notes from the previous 
sound are no longer being held down, and the sustain pedal 
is released.

For other modes, the Global 

Hold Time

 parameter is used. 

In Set Lists, however, you can control this separately for 
every Slot. For instance, you might want a reverb to ring out 
a long time for one sound, but delays to fade away quickly 
for another.

Note that the Hold Time set here applies to the notes and 
effects of the current Slot, when transitioning into the next 
Slot.

For more information, see “Smooth Sound Transitions” on 
page 119 of the OG.

Transpose

[–12…+0…+12]

This sets the transposition of the current slot, in semitones.

If the 

Transpose

 setting is any value other than 

+0

, the 

transpose value is shown in the slot.

Slot Transpose works similarly to the Global Key Transpose 
parameter (see “Key Transpose” on page 631). 

If the Slot contains a Program, its Drum Track Program is 
not affected by Transpose.

Similarly, if the Slot contains a Combination or Song, its 
Timbres or Tracks are not affected by Transpose if both of 
the following are true:

• The MIDI Channel is not the Global Channel, 

and…

• The Program’s Category is “Drums,” except for the sub-

category “Pitched” (used for timpani, for instance)

Dynamics

[0...127]

This adjusts how the volume and tone will be changed in 
response to how hard the keys are played (velocity) on this 
keyboard.

Pressing the button to turn DYNAMICS ON (the button will 
light) will enable the knob settings.

Turning the knob to the left will cause the sound to play 
softer in response to how hard you play the keys.

This is good for playing highly inflected passages from 
pianissimo (very soft) to fortissimo (very loud), such as solo 
piano or in band ensembles.

Turning the knob to the right will cause the sound to play 
louder in response to how hard you play the keys.

This is good for generally making your sound stand out 
when playing backing parts in a band ensemble, or when 
playing a solo.

The sound will not change when the knob is in center 
position.

For layered and split sounds, the dynamics effect will be 
applied to both sounds.

Note: 

The effect controlled may differ, depending on the 

Program. The dynamics will have no effect on Programs that 
do not change in volume or tone with velocity, such as organ 
sounds or some synth sounds.

Note: 

The effect will be applied to the selected velocity 

curve. For more information, see “Velocity Curve” on 
page 632.

1–1b: Slot Select

Slot Select

[000…127]

The 128 Slots are shown either 4, 8, or 16 at a time, 
depending on the selection at the top of the screen. To select 
a slot, simply touch it. For more information, see “0–1d: Slot 
Select” on page 561.

1–1c: Cut, Copy, Paste, and Insert

These buttons make it simple to re-arrange the Slots.

[---] (Multiple Slot selection tool)

This button allows you to select a range of slots. To use it:

1. Select the Slot at one end of the desired range of slots 

(either the first or the last).

2. Press the [---] button. 

Notice that the selected Slot now has a different highlight 
color.

3. Select the Slot at the other end of the desired range.

Once the desired range is selected, use the 
Cut/Copy/Paste/Insert buttons, as described below, to 
operate on the Slots. The selected range is also used by the 
Font and Color parameters.

Cut

This places the selected Slot(s) on the clipboard, removes 
them from their position in the list, and moves the rest of the 
list to fill in the now-empty space. Information about the cut 
Slot(s) is displayed below the buttons.

Copy

This places a copy of the selected Slot(s) on the clipboard, 
leaving the original(s) in place. Information about the copied 
Slot(s) is displayed below the buttons.

Paste

This replaces the selected Slot(s) with the contents of the 
clipboard. Paste is only available if Slots have already been 
Cut or Copied.

Insert 

This places the contents of the clipboard in front of the 
selected Slot(s), moving the rest of the list to make room. 
Insert is only available if Slots have already been Cut or 
Copied.

TFX 2
& EQ

Set List Slot Volume

Front Panel

MASTER VOLUME slider

Universal Exclusive

Master Volume

(Fom Knobs, Pedals,

MIDI, or Sequencer)

Headphone 

& Main L/R

Outputs

Program, 

Combination,

or Song

Master Volume

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов