manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 554 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 554

SEQUENCER mode

544

If the copy-source you specify is a portion of an audio 
event that spans several measures, or if the copy-
destination is a portion of an audio event that spans 
several measures, a new region will automatically be 
created and named when you execute the Copy Measure 
command.

Note: 

The WAVE file itself will not be modified.

Move Measure

This command moves the specified measures to another 
location. Existing data at the destination will be pushed back 
to make room for the moved data, and the data surrounding 
the old location will be moved to fill in the gap.

1. Select “Move Measure” to open the dialog box.

MIDI tracks

Audio Tracks

2. Use From: Track or “Audio Track” to select the move-

source track.

(By default, this will be the 

Track Select

 track.)

If 

All Tracks

, 

All MIDI Tracks

, and 

All Audio Tracks

 

are unchecked, only data from the selected track will be 
moved.
If you check 

All Tracks

, the playback data of all tracks 

including the Master Track will be moved.
If you check 

All MIDI Tracks

 (when a MIDI Track is 

selected), all MIDI tracks will be moved.
If you check 

All Audio Tracks

 (when an Audio Track is 

selected), all Audio tracks will be moved.

3. Use From Measure and To End of Measure to specify 

the region of measures that will be moved. 

By default, the range of measures will be set as specified 
on the Track Edit page.

4. Use To: Track or “Audio Track” (if you haven’t 

checked All Tracks

,

 All MIDI Tracks

,

 or All Audio 

Tracks) to select the destination track, and use 
Measure to select the starting measure at which the 
data will be inserted.

You can’t move between MIDI and audio.

5. To execute the Move Measure command, press the 

OK button. To cancel, press the Cancel button.

If you move a portion of an audio event that spans several 
measures, or if you move to a portion of an audio event 
that spans several measures, a new region will 
automatically be created and named when you execute 
the Move Measure command.

Note: 

The WAVE file itself will not be modified.

Create Control Data

This command creates control change, aftertouch, pitch 
bend, or tempo data in the specified region of a MIDI track 
or the master track.

1. In Track Select

,

 select the MIDI track on which you 

wish to perform the Create Control Data command.

If you wish to modify tempo data, select Master Track as 
the track. In this case, the step 4 item “Kind” will be set 
to “Tempo.”

2. Select “Create Control Data” to open the dialog box.

3. Specify the range into which the control data will be 

inserted.

In 

From Measure

 and 

To End of Measure

 specify the 

measures, and in 

Beat.Tick

 specify the beat and clock. 

(By default, the range of measures will be set as specified 
on the Track Edit page.)

4. Set “Kind” to the type of musical data (event) that you 

wish to create.
Control change:

 Control change data will be inserted. 

Use “#” to specify the CC number.

After Touch:

 Aftertouch data will be inserted.

Pitch Bend:

 Pitch bend data will be inserted.

Tempo:

 Tempo data will be inserted (if you’ve selected 

the master track).

5. In “Start Value,” select the starting value of the 

control data. In “End Value,” select the ending value 
of the control data.

By default, the “Start Value” will be set to the value of the 
existing data at the start location. If you wish to create 
control data that changes smoothly from the starting 

2 (4/4)

1 (4/4)

5 (3/4)

4 (3/4)

3 (4/4)

6 (3/4)

7 (4/4)

2 (4/4)

1 (4/4)

5 (3/4)

4 (3/4)

3 (4/4)

6 (3/4)

7 (4/4)

Track 1
(source)

Track 2
(destination)

Example: When you copy measures 5–7 of track 1 to the third measure of track 2,

measures 3–5 of track 2 will be rewritten.

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов