Korg NAUTILUS Series Скачать руководство пользователя страница 552

SEQUENCER mode

542

Audio tracks

3. In “At Measure,” specify the measure location at 

which the data will be inserted. (The measure you 
specified in Track Edit page From Measure will be set 
as a default.)

4. In “Length,” specify the number of measures that will 

be inserted.

5. In Meter, specify the time signature of the measures 

that will be inserted.

If you want the inserted measures to match the existing 
time signature, specify **/**. With any setting other than 
**/**, the time signature of the inserted measures will 
change, and the specified time signature will apply to all 
tracks for those measures.

6. Specify the track(s) for which you want to execute the 

command.

If you execute with 

All Tracks

All MIDI Tracks

, and 

All Audio Tracks

 unchecked, the measures will be 

inserted into the track that’s selected in 

Track Select

. Be 

aware that at this time, the playback data that follows the 
insert location will move toward the end of the song 
according to the number of inserted measures, but the 
time signature and tempo will not move.
If you check 

All Tracks

, the measures will be inserted 

into all tracks including the Master Track. The playback 
data in subsequent measures will play just as it did before 
this command was executed.
If you check 

All MIDI Tracks

 (when a MIDI track is 

selected), the measures will be inserted into all MIDI 
tracks.
If you check 

All Audio Tracks

 (when an Audio track is 

selected), the measures will be inserted into all audio 
tracks.

7. To execute the Insert Measure command, press the 

OK button. To cancel, press the Cancel button.

If you execute Insert Measure at a location in the middle 
of an audio event that spans several measures, two new 
regions that play the regions divided at the “At Measure” 
will be automatically created and named.

Note: 

The WAVE file itself will not be modified.

Repeat Measure

This command repeatedly inserts the specified measures for 
the specified number of times. When you execute the Repeat 
Measure command, the measures will be inserted following 
the measure specified by 

To End of Measure

, and musical 

data following the inserted data will be moved backward. It 
is convenient to use this command when you have a song 
that you playback with “Track Play Loop” (0–3a) turned on, 
and wish to expand it into musical data.

1. Use Track Select to select the MIDI track (MIDI 

Track 01–16) or audio track (Audio Track 01–16) that 
you want to insert data into.

2. Select “Repeat Measure” to open the dialog box.

MIDI tracks

Audio tracks

Track 2

5 (2/4)

4 (5/4)

1 (4/4) 2 (7/8) 3 (7/8)

1 (4/4) 2 (4/4)

4 (5/4) 5 (2/4)

3 (3/4)

1 (4/4) 2 (4/4)

4 (5/4) 5 (2/4)

3 (3/4)

1 (4/4) 2 (7/8)

4 (5/4) 5 (2/4)

3 (7/8)

Track 2

5 (2/4)

4 (5/4)

Track 2 1 (4/4) 2 (4/4)

1 (4/4) 2 (4/4)

4 (5/4) 5 (2/4)

3 (3/4)

3 (3/4)

1 (4/4) 2 (4/4)

4 (5/4) 5 (2/4)

3 (3/4)

1 (4/4) 2 (4/4)

4 (5/4) 5 (2/4)

3 (3/4)

Track 1

Track 1

Track 1

Track 2

Track 1

Time signature = **/**

Time signature = 7/8

Before Insert

After Insert

Before Insert

After Insert

Insert two measures

Measures 4 and 5 will use the previously specified 
time signature.

Measures 2 and 3 will be 7/8, and measures 4 and 
5 will be the previously specified time signature.

Insert two measures

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: