manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 659 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 659

GLOBAL > MIDI    1–1: MIDI

649

GLOBAL > MIDI

1–1: MIDI

Here you can make MIDI-related settings that affect the 
entire NAUTILUS. You can also transmit MIDI System 
Exclusive data dumps using the page menu commands in 
this page. 

1–1a: MIDI Setup

Basic

MIDI Channel (GLOBAL MIDI Channel)

[1…16]

Sets the global MIDI channel.

The global MIDI channel is used in the following cases.

• When transmitting and receiving performance data in 

PROGRAM mode (PROGRAM P0: Play) and 
SAMPLING mode.

• When selecting combinations via MIDI in 

COMBINATION mode (COMBINATION P0: Play).

• When selecting Set Lists and Slots via MIDI in SET 

LIST mode (SET LIST P0: Play).

• When controlling timbres or effects that have been set to 

Gch in any mode

• When transmitting and receiving system exclusive 

messages

MIDI received

In PROGRAM mode (PROGRAM P0: Play), MIDI data is 
received on the global MIDI channel, but in 
COMBINATION mode (COMBINATION P0: Play) or 
SEQUENCER mode, MIDI data is received on the MIDI 
channel specified for each timbre or track.

In COMBINATION mode (COMBINATION P0: Play), 
program changes received on the global MIDI channel will 
switch the combination (1–1c: MIDI Filter).

Use the global MIDI channel to switch IFX 1–12 (CC#92), 
MFX1&2 (CC#94) and TFX1&2 (CC#95) on/off.

To control the pan following IFX, sends 1/2, MFX 1/2 and 
TFX1/2, use the global MIDI channel when in the 
PROGRAM or SAMPLING mode; while in the 
COMBINATION, or SEQUENCER modes, use the channel 
specified separately by 

Ctrl Ch

 for IFX1–12, MFX1&2, 

TFX1&2, and MEQ. By setting 

Ctrl Ch

 to Gch, you can 

control these parameters from the global MIDI channel.

MIDI output when playing NAUTILUS

In PROGRAM mode and SAMPLING mode, this data will 
be transmitted on the global MIDI channel. In 
COMBINATION mode, data will be transmitted 
simultaneously on the global MIDI channel and on the MIDI 
channels of timbres whose 

Status

 (COMBINATION 0–1b, 

2–1a) is set to EXT or EX2.

In SEQUENCER mode, musical data will be transmitted on 
the channel specified for the currently selected track 
(SEQUENCER 0–1a) (whose 

Status

 is Both, EXT, or EX2).

Local Control On

[Off, On]

Local Control On (Checked):

 The NAUTILUS’s internal 

tone generator will be controlled by its own keyboard, 
joystick, SW1 and SW2, and connected foot pedal. If you are 
playing the NAUTILUS by itself, leave this setting checked.

Local Control Off (Unchecked):

 The NAUTILUS’s 

keyboard and joystick etc. will be disconnected from the 
internal tone generator.

This means that operating the NAUTILUS (playing its 
keyboard and using the joystick, or playing back the 
sequencer) will not sound its internal tone generator.

Turn 

Local Control

 Off if loop-back from an external 

sequencer causes duplicate notes.

0–1c

0–1d

0–1e

1–1PMC

1–1a

1–1b

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов