manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 300 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 300

EXi: PolysixEX

290

4–1h: EFFECTS

MODE

[OFF, CHORUS, PHASE, ENSEMBLE]

Switches the effect mode. Choose from chorus, phase, and 
ensemble.

SPREAD

[0.00…10.00]

Adjusts the width to which the effect sound will be panned.

SPEED/INTENSITY

[0.00…10.00]

Adjusts the speed or intensity of the effect.

If 

MODE

 is set to 

Chorus

 or 

Phase

, this adjusts the speed. 

If 

Ensemble

 is selected, this adjusts the depth.

4–1i: Parameter Details

When you touch a knob or switch, a yellow square appears 
around it, showing that it has been selected.

The Parameter Details area shows information for this 
selected item, including its parameter group and parameter 
name, its exact value, and its AMS assignments.

Individual parameters and AMS

PITCH BEND RANGE

 is not modulatable via AMS. The 

PAN

 knob and a number of switches are modulatable by a 

single AMS source, as described under “Pan knob and 
Buttons,” below. The rest of the continuous knobs on this 
page are modulatable via two AMS sources, as detailed 
under “Knobs,” below.

(Parameter group)

This shows the group of the parameter (such as 

VCO

).

(Parameter name) [range depends on parameter]

This shows the name and exact value of the parameter. You 
can edit the parameter value with any of the standard data-
entry controls.

Knobs

AMS

[List of AMS Sources]

This selects a modulation source to control the selected 
parameter. For a list of AMS sources, see “Alternate 
Modulation Source (AMS) List” on page 901.

Intensity

[range depends on parameter]

This controls the depth and direction of the AMS 
modulation. For unipolar parameters, the range is the same 
as that of the selected parameter, in both positive and 
negative directions. For instance, if the parameter range is 
0.00…10.00, the Intensity range will be -10.00…+10.00.

For bipolar parameters, including 

FILTER EG 

INTENSITY

, 

VCA ATTENUATOR

, 

TRANSPOSE

, and 

TUNE

, the range is twice that of the original parameter. For 

instance, if the original parameter range is –24.00…+24.00, 
the Intensity range will be double that: –48.00…+48.00. 
This allows full modulation of the parameter, regardless of 
the initial setting.

In some cases, you can use this to modulate the parameter 
outside of its original range, for a wider range of values.

Int Mod

[List of AMS Sources]

You can modulate the main AMS Intensity from another 
AMS source. This selects that source. For a list of AMS 
sources, see “Alternate Modulation Source (AMS) List” on 
page 901.

Intensity

[range depends on parameter]

This controls the depth and direction of the Intensity Mod. 
The result is summed with the main AMS Intensity to 
produce the final modulation amount.

Pan knob and Buttons

The 

PAN

 knob and the 

OCTAVE

, 

WAVEFORM

, 

SUB 

OSC

, 

VCA MODE

, 

MG MODE

, and 

EFFECTS MODE

 

switches can each be modulated from a single AMS source.

TEMPO SYNC

, 

KEY SYNC

, and 

BASE NOTE

 are not 

modulatable.

AMS

[List of AMS Sources]

This selects a modulation source to control the selected 
parameter. For a list of AMS sources, see “Alternate 
Modulation Source (AMS) List” on page 901.

Intensity

[range depends on parameter]

This controls the depth and direction of the AMS 
modulation. The range is the same as the selected parameter, 
in both positive and negative directions. 

v  

4–1: Page Menu Commands

• Compare 

→

p.112

• Write Program 

→

p.112

• Exclusive Solo 

→

p.113

• PAGE 

→

p.126

• MODE 

→

p.126

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов