Korg NAUTILUS Series, Руководство по параметрам, Страница: 505 / 961

SEQUENCER > MIDI Filter/Zones 3–6: Velocity Zones
495
3–6: Velocity Zones
Here you can set the Top/Bottom Velocity parameters to
specify the range of velocities that will be sounded by MIDI
tracks 1–16, and Top/Bottom Slope specify the range over
which the volume will be adjusted.
These settings do not affect MIDI transmission/
reception. All note data that is received will be recorded
into the internal sequencer, and all note data from the
internal sequencer or from the keyboard will be
transmitted.
It is not possible to set the bottom velocity greater than
the top velocity for the same track. Nor can the top slope
and the bottom slope overlap.
3–6a: Zone Map
This area provides a graphic display of the note and velocity
ranges in which each MIDI Track will sound. The slope
portions of the zones are displayed in a different color.
Under the Key Zone graphic, a keyboard graphic shows the
most recently-played note in green, aligned with the
keyboard zones.
To the left of the Velocity Zone graphic, a meter shows the
velocity of the most recently-played note; red dots above the
graphic show the Zone(s) triggered by that velocity.
For more information, please see “3–5a: Zone Map” on
page 493.
3–6b: Velocity Zones
Track 01 (Track Number)
Top Velocity [1…127]
Specifies the maximum velocity value that will sound each
track.
Top Slope [0…120]
Specifies the number of velocity steps over which the
original volume will be reached, starting from the Top
Velocity.
0: The volume will be at the original value from the top
velocity.
120: The volume will decrease as the velocity approaches
the top velocity.
Bottom Slope [0…120]
Specifies the number of velocity steps over which the
original volume will be reached, starting from the Bottom
Velocity.
0: The volume will be at the original value from the bottom
velocity.
120: The volume will decrease as the velocity approaches
the bottom velocity.
Bottom Velocity [1…127]
Specifies the minimum velocity that will be sounded by each
MIDI track 1–16.
“Top Velocity” and “Bottom Velocity” settings can also be
input by holding down the ENTER button and playing a note
on the keyboard.
0–1a
1–1b
3–6PMC
3–6a
3–6b
Bottom Velocity Top Velocity
Velocity
Volume
Bottom Slope
Top Slope
How volume will change according to keyboard location