manualshive.com logo in svg

Korg NAUTILUS Series, Руководство по параметрам, Страница: 765 / 961

Поделиться
Скачать
Korg NAUTILUS Series Скачать руководство пользователя страница 765

Total Effects (TFX1, 2)    In/Out

755

Total Effects (TFX1, 2)

In/Out

The total effects TFX1 and TFX2 are stereo-in and stereo-
out. The Dry (unprocessed) side of the 

Wet/Dry

 parameter 

sends the stereo input sound directly to the stereo output. 
The way in which the Wet (processed) side is output depends 
on the type of effect, as follows.

Mono–Mono Parallel

141: P4EQ//P4EQ-185: Mt.BPM Dly//Mt.BPM Dly

For details, see “Mono–Mono Parallel Effects” on page 737.

If you select 000:No Effect, the stereo input will be passed to 
the stereo output without any processing.

You can switch the effects on/off using the MFX1 or 2 
ON/OFF buttons or the MFX/TFX– Routing settings in each 
mode. When off, the effect will be bypassed. The stereo 
input will be passed to the stereo output without any 
processing, just as if 000:No Effect is selected.

Separately from this ON/OFF button, MIDI control 
change CC#95 can be received to turn TFX1 and TFX2 
off. A control change value of 0 turns them off, and a 
value of 1–127 restores them to the prior setting. You can 
also use “Effect Global SW” to turn off TFX1 and TFX2 
in the same way. This is controlled on the global 

MIDI 

channel

.

Routing

The total effects TFX1 and TFX2 are placed immediately 
before the AUDIO OUTPUT (MAIN) L/MONO and R 
outputs. Both effects (TFX1 and 2) are available in all 
modes.

If the 

Bus Select

 setting for an oscillator 

(PROGRAM/SAMPLING modes), timbre 
(COMBINATION mode), track (SEQUENCER mode), or 
audio input (in all modes) or the post-insert 

Bus Select

 is set 

to L/R, the signal will be output from the AUDIO OUTPUT 
(MAIN) L/MONO and R jacks.

The sound from MFX1 and 2 is routed through TFX1 and 
TFX2, and then output to AUDIO OUTPUT (MAIN) 
L/MONO and R.

Stereo In - Stereo Out

Mono In - Mono Out

Mono In - Stereo Out

Effect
Effect

Effect

+

Effect

+

Wet

Содержание NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов