Korg NAUTILUS Series, Руководство по параметрам, Страница: 466 / 961

SEQUENCER mode
456
0–6: Recording Setup
Here you can specify the realtime recording method, adjust
levels and make other settings for audio recording, and
adjust the metronome settings.
Selected Track Info
This displays information about the currently selected MIDI
or audio track. For more information, see “0–1b: Status
Play/Mute” on page 446.
0–6a: Recording Setup
Selects the method of realtime recording.
For detailed, step-by-step instructions, please see “MIDI
recording” on page 74 of the OG.
Overwrite
When recording for the first time, you will normally select
this method.
To begin recording, press the SEQUENCER REC button and
then the SEQUENCER START/STOP button. To stop
recording, press the SEQUENCER START/STOP button
once again.
If you use this method to record on a track that has already
been recorded, the result will differ depending on the track
or type of event, as follows.
MIDI Tracks, Audio Track Automation Events: All data
following the measure at which you begin recording will be
erased.
Audio Track Audio Events: As with Overwrite, only the
measures you recorded will be overwritten; the data in
subsequent measures will remain unchanged.
Overdub
Select this method when you wish to add data to a
previously-recorded track. (except for audio events)
To begin recording, press the SEQUENCER REC button and
then the SEQUENCER START/STOP button. To stop
recording, press the SEQUENCER START/STOP button
once again.
If you use this method to record on a track that has already
been recorded, the result will differ depending on the track
or type of event, as follows.
MIDI Tracks, Audio Track Automation Events: The
previously-recorded data will remain, and the newly-
recorded data will be added to it.
Audio Track Audio Events: As with Overwrite, only the
measures you recorded will be overwritten; the data in
subsequent measures will remain unchanged.
Manual Punch In
Select this method when you wish to use the SEQUENCER
REC button or a foot switch to re-record selected portions of
a previously-recorded track.
Press the SEQUENCER START/STOP button to playback
the song. When you reach the measure at which you wish to
begin re-writing the data, press the SEQUENCER REC
button or the foot switch, and recording will begin. When
you are finished recording, press the SEQUENCER REC
button or the foot switch once again, and recording will end.
Auto Punch In
Select this method when you wish to automatically re-record
selected portions of a previously-recorded track.
If you select Auto Punch In, the display will indicate “M***–
M*** (Auto Punch In Start Measure–Auto Punch In End
Measure)” at the right, allowing you to specify the range of
measures that will be rewritten.
Press the SEQUENCER REC button and then the
START/STOP button, and playback will occur until the
specified measure is reached. Then, recording will occur
only over the specified area (
Start Measure – End
Measure ), rewriting it with the newly recorded data.
0–6c
0–6PMC
0–1a
0–6a
0–6b
0–6d